Cutting a straight line through plywood with a circular saw seems easy enough, but it rarely comes out as straight as it feels while you’re making the cut. Use a Board as a Straightedge The first and most obvious way to create a guide is to clamp a board to the plywood and run the saw along the edge. The key is to use a wide board so that you can keep your clamps clear of the motor of the circular saw.
Making straight cuts in plywood is super easy when you have a straight edge to guide your saw. How To. See how easy and fast it is to make this Circular Saw Straight Edge Guide. Now you can have both of these cuts done for you at your home center, but if you have another sheet of plywood laying around that still has a straight factory edge on it, or another long straight edge, you can use that.
Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
There are two versions of the Kreg Straight Edge Guide. The classic Straight Edge Guide spans material up to four feet, while the Straight Edge Guide XL spans material up to eight feet. The Straight Edge Guide isn’t limited to use with just your circular saw, but can also be used with a router to make dadoes or grooves, or with a jig saw.
how to use an edge guide on a circular saw Related Question:
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Why would you want to use a guide with a circular saw?
Accuracy is important when cutting wood. To help prevent cuts from veering away from the cut line, watch the blade as it moves along the line and not only the guide markings that are on the saw’s shoe. Using a saw guide will ensure the tool cuts in a straight path.
How do you use a straight edge clamp?
A straight edge clamp works with a circular saw, router, jigsaw, or other power saw to create a straight edge. Attach the clamp to the work material by pulling the fixed end of the clamp against the piece, and then sliding the movable end against the piece’s opposite edge.
Which side should the blade be on a circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
How do you cut a circular saw accurately?
Using a Straightedge for Accurate Circular Saw Cuts Measure the exact distance from the edge of the circular saw’s shoe to the same side of the blade. Once you have that measurement, add it to your original marks and make a new line. Set the straightedge on the new marks, clamp it down, and make your cut.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Can I rip wood with a circular saw?
One of the most common ways we use to make rip cuts with a circular saw is to clamp a straight edge. To do this accurately, you need to know the distance from the edge of your shoe to the blade. From your cutline, clamp both ends of your straightedge the distance you measured between the shoe edge and blade.
What is a straight clamp?
Straight-Line Clamps Also known as straight-line toggle clamps, they have a lever handle that engages a plunger, which presses against a workpiece to hold it in place. Straight-line clamps with push/pull action can be locked with the plunger in a fully extended or fully retracted position.
What can I use as a straight edge?
If there are no markings, it is simply a straight edge. A ruler can be used for measuring and marking straight lines. A straight edge will not help you measure, but most are built more durably than rulers, making them a superior tool for marking straight lines. In most cases, rulers can function as a straight edge.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Why do circular saws cut upwards?
The teeth of circular saw blades are intended to cut upwards into the material from below and this is for safety purposes. It is important that you should not spin them in a different direction just like you spin a table saw blade.
Why are so many circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
