Ceramic tile cutters are used to cut tiles to a required size or shape. The ceramic tile cutter works by first scratching a straight line across the surface of the tile with a hardened metal wheel and then applying pressure directly below the line and on each side of the line on top. The first tile cutter was designed to facilitate the work and solve the problems that masons had when cutting hydraulic mosaic or encaustic cement tiles.
If you’re used a glass cutter, place a length of wire hanger or other appropriately sized material beneath the scored line, then push down on either side of the tile to snap it; alternatively, grab the tile nippers and snip off the scored piece. Whether you plan to invest in the purchase or rent one to save a few bucks, just make sure you pick up a tile cutter that’s big enough for the tile you’re cutting! Then, as mentioned above, practice on a few spare tiles until you’re comfortable with this tiling tool. Starting at the edge of the tile, place the tile into the tile nippers and squeeze, removing just a small amount of tile.
Using a diamond blade to cut with, electric cutters can cut through the hardest forms of tile. Due to design and ease of u.se for manual cutters, professionals are also able to cut tile at a much faster rate using a manual cutter than with an electric cutter. Depending on which RUBI manual cutter you have, your breaker mechanism may be setup differently.
how to use ceramic tile cutter Related Question:
Do you push or pull a tile cutter?
As you can see, both push and pull tile cutters have their advantages and disadvantages. Some professional tilers prefer the push cutter because it’s easier on the wrist and allows them to have more control, while others prefer the pull cutter because they can use their knee to stabilize the tile during a cut.