Choose the perfect grinder that will help you sharpen your chainsaw effectively. Make sure to test your grinder before sharpening your chainsaw. For the best results, you want to sharpen your chainsaw chain on a low-speed grinder at 1,750 rpm.
Since saw chains have cutters that alternate orientation along the chain, you need to use a chainsaw sharpener on all cutters on one side, then swivel the chain holder and tackle those pointing the other way. An electric chainsaw sharpener is ideal for this kind of periodic chain maintenance, though you will need to change the abrasive wheel to an extra-wide version made for this work. No matter how you use a chainsaw sharpener, it makes sense to keep an extra chain or two on hand, sharp and ready to go as you’re working in the forest.
Except for a little bit of green at the top, that tree was nearly dead. It’s best to cut down a tree while it’s still physically sound. If your notch went most of the way across the tree, and the tree started falling the opposite direction, there would be no way to stop it from falling over backwards. My homemade sawmill was far away, and it isn’t designed for coniferous trees, nor for trees this large.
how to use chainsaw grinder Related Question:
What angle do I grind my chainsaw chain?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.
Can you sharpen a chainsaw with an angle grinder?
Worked like a charm. The trick is to angle the grinder blade back a bit, and to alternate to one side or the other to follow the alternating skew angle of the teeth. I had to be careful not to cut into the links themselves.
How do I make my chainsaw chain more aggressive?
In general, if you want to have an aggressive cut, you are going to need a chainsaw chain that operates as quickly as possible. A chainsaw chain with full chisel teeth means that you are cutting with a very high speed. Speed being one of the main ingredients behind an aggressive chain, this is clearly vital.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
What makes a chainsaw cut at an angle?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
What angle should I sharpen my Stihl chainsaw chain?
STIHL saw chains are generally filed to an angle of 30° – parallel to the service mark for the filing angle. Hold the file so that one quarter of its diameter projects above the top plate.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
How long should a chainsaw blade stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How many times can you sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Is it better to sharpen chainsaw chain or buy new?
Sharpen before replacing If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. This is why, where possible, you should be looking to keep the will be chain sharp, as sharpening a better course of action than sourcing a replacement.
Why does my chainsaw not cut?
The most common cause of a chainsaw that won’t cut properly is a dull cutting chain. Try sharpening or replacing the chain. The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood.