Quickly and safely condense your blades for convenient storage. After removing the clip or masking tape, hold one outside blade coil in each hand with the teeth pointed away from you, and slowly spread them apart. Extend your arms away from your body and spread your hands apart as you continue to uncoil the blade.
The best way to store a band saw blade is in a coil, the way it came from the factory. Speaker 1: The safest way to store bandsaw blades is in a coil. Learning how to coil your bandsaw blade isn’t difficult, it just requires a little bit of practice, some heavy gloves and some safety glasses.
I must admit, when I know someone is watching that hasn’t seen me fold up a bandsaw blade before, I do it extra fast and super snappy to make it seem even more dazzling. I learned how to coil a bandsaw blade like this pre-YouTube and over the phone from the kids at Wood-Mizer, who supply and sharpen my blades. From there, whip the portion of the blade furthest from you towards the ground and just as the blade nears the ground give it a quick jerk up, with a snap.
If you are trying to fold a bandsaw blade while standing just casually, it’s not going to happen properly. While you hold the blade with your hand, keep your wrist down and try to maintain a safe distance between the blade and your body. Whether you are a beginner or a regular user of bandsaw blades, these steps will definitely help you to master how to fold a bandsaw blade without any difficulties.
how to wrap bandsaw blades Related Question:
How tight should your bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
Can you flip a bandsaw blade inside out?
Just turn them inside out, it doesn’t make any difference. The only difference is what side they had up when they welded them. When I get blades from WM, they are ready to go on the mill.