Chainsaws do not have a blade but a chain made up of lots of little teeth with sharpened blades on them, and few situations are as frustrating as dealing with a length of razor-sharp metal teeth that won’t behave as intended. There is a trick to untangling a new or old chainsaw chain that makes the process so simple that you’ll wonder why you didn’t think of it. Because chainsaw chains are stiff, the dangling, lowest part will poke straight out like a board until it reaches a vertical position.
No matter how snarled a chainsaw chain is, you can still untangle it using a simple repeated method. Proper care of a chainsaw and chain will give your chainsaw a longer and more productive life! The easiest way to care for your chainsaw chain is to make sure it’s clean, well-oiled, and the teeth are sharpened.
To survive the situation without postponing the work or destroying the chainsaw, you must learn how to untangle the chainsaw chain. Well, if the chain is still locked up in the chainsaw blade, then you need tools to remove the chain from the chainsaw. If it’s jammed in the chainsaw: Use the tools that suit your chainsaw and open your gasoline or electric chainsaw to get the chain off the chainsaw.
These could aid with taking the chain or chainsaw housing off. Continue to hold loops in your hands, and then raise the absolute lowest part of the chain. As a result, it will slide right past the loops, causing the chain to untangle.
how untangle chainsaw chain Related Question:
How do you get a knot out of a chainsaw chain?
Raise the lowest part of the dangling chain while continuing to hold the loops in your hands. Because chainsaw chains are stiff, the dangling, lowest part will poke straight out like a board until it reaches a vertical position. You can guide its movement easily by using only your hands’ grasp on the loops.
Why does my chainsaw chain keep getting tight?
Re: Chain tightens by itself Has the oiler stopped working, or the oil feed hole in the bar got plugged with sawdust. Running without oil will do that sort of thing.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Do chainsaw chains stretch over time?
It’s perfectly normal for a chainsaw chain to stretch after regular use. But, if you allow your chainsaw to become too loose, it can easily come off and pose a dangerous situation for you. A chainsaw chain stretches and loosens from tension and extreme friction.
Is a chainsaw chain supposed to be loose?
The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it.
Why does my chainsaw keep throwing the chain?
The drive sprocket is the mechanism that propels the saw blades on the chain around the bar. If the sprocket gets significantly worn down, it will be impossible to maintain proper chain tension, which will result in your chain saw throwing its chain.
How often should you sharpen a chainsaw?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why do chainsaws smoke?
An abundance of smoke emanating from the engine often indicates that an excessive amount of oil has been introduced into the oil and gasoline mixture that powers the chain saw. Ensure that you’re mixing the correct amount of oil and gasoline according to the dictates of your owner’s manual.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
Do chainsaw chains have a master link?
Locate the master link that most manufacturers install to make removal of the chain a simple process. A visual inspection of the chain will reveal the master link due to its appearance that makes it stand out slightly from the other links.
Does dirt dull a chainsaw blade?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.