A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
If you do not need a large-scale sawmill, there’s absolutely no need to spend more money on one and you would be better off with a chainsaw mill. In order for you to be able to fit your chainsaw into the sawmill, it must be compatible or else it won’t fit. Before you proceed with purchasing a sawmill, you need to make sure that your chainsaw and the sawmill are actually compatible, unless you plan on purchasing an additional chainsaw.
Chainsaw mills are small sawmills designed to be used by just one or two operators to mill logs into lumber. More elaborate chainsaw mills consist of a track and frame system to which the chainsaw is mounted. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Like we stated in the intro, chainsaw mills aren’t worth it for four reasons: labor, cost, time, and waste. I know I’ve been pretty critical of chainsaw mills up to this point, but there is one reason why a chainsaw mill could be worth it. Chainsaw mills aren’t worth the physical and time demands required to mill the logs.
Customers are regularly impressed with the quality of the cut from the chainsaw mill, imagining that the chainsaw will necessarily make a terrible cut with a nasty surface finish, which it does not. As far as I am concerned, any mill which uses a chainsaw chain and bar is a chainsaw mill, no matter the setup. If you didn’t own a chainsaw and decided that you wanted to cut some lumber, you could be making your own lumber for about $500, for a small chainsaw and the Alaskan mill attachment.
how well do chainsaw mills work Related Question:
Is working at a sawmill worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
How long does it take to chainsaw mill?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
How thin can you cut with a chainsaw mill?
The Alaskan Mill Mark III Attachment can cut boards as thin as 1/2″ and as thick as 13″. Setup and make your first cut, remove this first slab, then use the Mini-Mill II to edge the log.
How long should pine dry before milling?
Depending on the thickness of the lumber and where you live, weather and time of the year, it will take anywhere from 6 weeks to 4 months. Most lumber is in the 1” to 2” thickness and the time above applies to thicknesses. Drying cants, timbers, posts will take considerably longer.
Will a saw mill pay for itself?
If you are looking to build for yourselves, the sawmill will quickly pay for itself once you start looking at the cost of wood at lumber/hardware stores and comparing it to what you are cutting.
Is chainsaw milling worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
How big of a chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
Is it cheaper to mill your own wood?
In the end, only you can decide if milling lumber from your own property is worth it. Because every job is different, we can not tell you the actual amount of money you would save or not save. Generally, it costs 5-10% more to have your lumber milled on-site.
Is it cheaper to buy lumber from a sawmill?
Though it may not appear bad, the cost of lumber in big box stores is VERY expensive. You don’t realize it because you don’t have anything to compare it to. Buying your lumber directly from a sawmill can be significantly less, though there may be additional preparation needed before it can be used as we will see below.
How much does it cost to have lumber milled?
By the Board Foot Pricing varies by species and location but ranges from $0.25 to $0.50 per board foot of sawn lumber.
Can you mill with a regular chain?
Re: ripping chain I have ripped thousands of feet of logs with a chainsaw and regular chain cuts faster just not as smooth of a finish as ripping chain. If you are just breaking down large logs to fit on the mill I would use regular chain.
How thick should I mill slabs?
Generally I mill slabs at 2 1/2 – 3 inches thick….. stack and sticker with weight on top.
How thick are mill slabs?
*Cut slabs a minimum of 2″ thick to minimize warping. Saw thicker slabs for specific purposes or projects. If you want to use the warp-prone pith (the log’s center), cut it as a 4–5″-thick slab, as shown at right.
Should you let logs dry before milling?
Summary: Logs should be milled for drying as soon as possible, and the ends should be sealed as soon as they are felled. A bandsaw mill will create less waste than a chainsaw mill.