Adjustable Eccentricity Block – The eccentric block is easy to adjust, has different voltages, and can be used with different types of power. It meets all kinds of needs for different types of use.
It has pure copper enameled wire for the stator, full copper winding, and a special vacuum dip coating process. The insulation is Class F, and the stator has pure copper enameled wire for the winding.
Low noise, high efficiency, smooth operation, fast heat dissipation, low temperature rise. Long service life.
It has an aluminum alloy case that is light and easy to move around. It has a fast heat dissipation rate and low temperature rise, as well as an anti-oxidation and anti-rust coating on the connecting piece, which makes it waterproof and insulated.
The small vibration motor can be used in a lot of different places, like mining, metallurgy, coal, electricity, construction, chemicals, medical equipment, food machinery, and more.
Size:40.
Specificatio.
wattage: 40.
This is the current value: 0.28 .
In this case, it is 110V AC.
Speed (RPM) at 50Hz: 300.
At 60Hz, the speed is 3600 RPM.
The force: 0.4K.
In this frame, the number one is shown.
Waterproo. IP65 is the rating for this.
Insulation is grade F. This means that it is very good.
Using this system: S1 (continuous duty.
Cooling mode: the natural way to cool (IC410.
It is best to keep the temperature of the place where you are working between -4°F and 104°F (-20°C and 40°C) so that you can work.
When you buy a package, you’ll ge.
In this case, there is only one vibrator motor.
The media couldn’t be loaded because it was too big to move.
This is how it was done on a small vibration table. We use it all the time with a variac to change the speed so we can test our products for reliability. Happy with the unit. Keep running it for a week now. If we’re running a lot of power and the load is high, the motor gets a little hot. But it’s still holding up much better than the cheap motor that came with the vibration table.
When you connect the motor to your power source, you will need to either wire it into your power source or put a plug on the end of it. With a variac, you can change the speed of the motor if you need to.
We are getting vibration in the range of 6G at 70% power up to 20G at 100% power.
