3. 6 volts is the voltage. Rechargeable lithium-ion battery with a capacity of 3. 6V/1. 3 Ah is built in.
Charger for the battery is included. A total of ten screwdriver bits are included.
A cordless screwdriver with a bit holder is included. On/off switch is located on the back of the unit. It can also be used as a switch to rotate the camera to the right or left.
A lithium-ion battery with a low self-discharge rate that can be recharged approximately 500 times is built into the device.
Soft synthetic rubber is used for the handle, which is easy to grip. Henrik Perutz is the designer.
Product description ABS plastic and synthetic rubber are used for the cover. Steel and oil bits are included in the set. Epoxy plastic is covered in Part 1 of this article. Steel is covered in Part 2 of this article. The third section is devoted to reinforced polyamides.
UPDATE: The charger stopped charging after less than a year (the indicator light does not illuminate when the charger is plugged into a wall). However, I suppose it can still be used as an inconvenient and bulky regular driver, despite its shoddy construction. I would no longer recommend this product.
The use of an electronic screw driver makes putting together furniture a whole lot easier. It didn’t matter that I lost control and ran the bit up against the screw because the bits were still strong enough. If you’re ordering any kind of do-it-yourself furniture (e.g. IKEA) from Amazon and don’t already have decent tools, I believe it’s worth the money; having this is just very convenient. As an added bonus, it is rechargeable, so you won’t have to worry about having spare batteries on hand to power it. See the attached photo for a closer look at the components that come with it. I believe it is intended to work for all IKEA furniture (at least, it has worked for me so far), but don’t take my word for it; do your own research.
