Premium Quality: Made of heat treated Chrome Vanadium Steel with a black oxide coating, these bearings provide excellent performance when subjected to standard torque compression.
Sockets and drive tools benefit from the unique design, which allows them to be more flexible while also increasing the versatility of the ratchet and socket set. Spring-loaded detent balls keep your sockets secure, and through holes allow you to use locking pins and rings to further secure your sockets.
Product Dimensions:This set contains a diverse collection of adapters and reducers. Because it includes the following conversions and sizes, it will provide greater versatility: 3/8″ to 1/4″ reducer, 1/2″ to 3/8″ reducer, 1/4″ to 3/8″ adapter, 3/8″ to 1/2″ adapter, 3/8″ to 1/2″ adapter.
This package contains the following items: 3/8″ to 1/4″ reducer, 1/2″ to 3/8″ reducer, 1/4″ to 3/8″ adapter, and 3/8″ to 1/2″ adapte.
Guaranteed quality for 30 days with no questions asked, plus a 12-month warranty on replacement parts.
Q: Is this a half-inch drive or a full-inch drive.
A: This set of adapter reducers includes 1/4″ to 3/8″, 3/8″ to 1/4″, 3/8″ to 1/2″, and 1/2″ to 3/8″ adapters, as well as a 1/4″ to 3/8″ adapter reducer. In the case of a single set, you will receive four reducers.
Q: What exactly is Impact.
The answer is that it’s a type of wrench/driver that allows you to use an impact wrench when necessary to loosen a nut or bolt without the adapter breaking, or you can simply use it for any job that doesn’t require the use of an impact wrench. Q: What is an impact wrench.
Q: Would the impact adapters be compatible with a standard ratchet.
A: They are designed to be used exclusively with high-torque impact tools and applications, and nothing else. Using impact reducers in place of chrome reducers on breaker bars and hand ratchets incorrectly will result in much lower torque values being reached before failure. If you’re only going to use them with non-impact hand tools, it’s preferable to get the chrome non-impact variety.
Specificatio.
1/2″ to 3/8″: 12.7mm square hole to 9.53mm square head (12.7mm square hole to 9.53mm square head).
3/8″ to 1/4″: 9.53mm square hole turn, 6.35mm square head, 9.53mm square hole turn, 9.53mm square hea.
12.7mm square head with a 9.53mm square hole in it for 3/8″ to 1/2.
4/32″ to 3/8″: square hole of 6.35mm to 9.53mm, square head of 9.53m.
The package contains the following items.
Each Impact Adapter Reducer has a different function (Total 4 Pieces.
Reducer for 1/2″ drive (F) to 3/8″ drive (M) shaft.
Reducer with 3/8″ drive (F) and 1/4″ drive (M) thread.
A 3/8″ drive (F) to 1/2″ drive (M) adapter is available.
– Adapter for 1/4″ drive (F) to 3/8″ drive (M) thread.
Impact sockets, by any means, are not permitted. Whether the surface is powder coated or not, the images speak for themselves.
