Track saws are essentially circular saws that run along a track. However, track saws have several added features (scoring, full blade cover, dust collection, riving knife). Circular saws are much cheaper than track saws.
A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none. A circular saw is slightly heavy hence not easy to carry, whereas the track saw is lighter.
On the surface, a track saw and a circular saw look very similar. In our track saw vs circular saw comparison, we’ll be taking an in-depth look at both of these powerful tools to see which one is best for you. Whether you’re cutting sheets of wood to make a piece of furniture, cutting the deck to size, or creating smaller homemade projects, a power saw is great.
Before we move on to identify the differences between the circular saw and track saw, it would be a good idea to see what these two saws actually are and also their specific workability. Some of the conventional circular saw classification are hypoid circular saw, worm driven circular saw, and sidewinder circular saw. Track saw vs circular saw, both saw are unique and extremely use for woodworkers.
The main difference between a circular saw and a track saw is that track saws attach to tracks that guide them across the board to make a cut. Track saws are portable; you can carry the small, handheld track saw and the track to the wood you need to cut, rather than having to bring the wood to your saw. Although both the track saw and the circular saw use circular blades, the track saw’s blade is less visible and exposed than the circular saw’s.
is a track saw the same as a circular saw Related Question:
Can any circular saw fit on a track?
There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone.
What is the advantage of a track saw?
Track saws make long, precise cuts faster and better than table saws and circular saws. They are light and portable, don’t need clamps and set up quickly and accurately.
Can you turn a regular circular saw into a track saw?
TrueTrac Universal Circular Saw Guide System Our track saw system allows you to turn the standard saw or router you already own into a track guided tool, with minimal modifications required.
Are track saws worth it?
Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.
Is a track saw a plunge saw?
A plunge saw, sometimes referred to as a track saw, is a type of hand held circular saw which slides on a rail during application. You can perform long and accurate cuts with a plunge saw. Unlike other saws, a plunge saw can be fed at the start of the material or be plunged directly into where you need to cut.
Can you joint with a track saw?
As a result, a track can replace a jointer to square and joint the edges of timber. However, it cannot completely replace the ability of a jointer to remove bows, cups, and bends. Because you can cut straight edges with a track saw, it is an excellent tool for jointing lumber edges.
How does a track saw stay in place?
While it cuts, a plunge-cut track saw rides along a stable track, which stays in place thanks to non-slip, non-marring pads on its underside.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
Is track saw safer than table saw?
Track saws are much safer than table saws. Table saws are more powerful than track saws. Track saws allow you to cut large sheet goods that may be difficult to handle on a table saw. Table saws allow easy repeatability when making rip cuts.
Can you use a plunge saw without the track?
All of the saws can be used without a track, just like a regular circ saw. But guiding them with a track guarantees dead-straight cuts. All the tracks work similarly: The saw straddles a raised rib that maintains a straight cutting line, and rubber grip strips on the bottom prevent the track from scooting during a cut.
What keeps a track saw from moving?
This power tool allows ultra-accurate cutting along straight lines on wooden boards of all sizes. Unlike a typical circular saw, track saws provide users with specific cutting depth. The track will stabilize the saw when running, deterring it from moving or slipping away from the marked line.
How deep can a track saw cut?
Most track saws can cut just over 2 inches deep; however, some of the larger track saws can cut up to 2½ inches deep.
Can you rip boards with a track saw?
The track saw is great for ripping boards, cutting trim, and providing splinter-free cuts across panels. The track saw is also excellent when used as a plunge saw because you can set it to a precise depth and it won’t fail you.
What is at track used for?
T-track is a versatile product that has many great uses around the shop. It can be attached to the fence of a chop saw, drill press or router table to provide a quick, secure place to attach feather boards, stops and hold-downs.
Does ridgid make a track saw?
DIY Track Saw Straight Edge: Featuring Ridgid’s Octane Circular Saw.
