I have’nt used their bars but used up a few semi chisel 3/8 loops. The only issue I have with it is stretch, by the time the loop is over have used the stretch is a lot more than top tier chain. I give chain a hard time cutting Aussie hardwoods, others may not find stretch so much of an issue.
Plus I need to make a 36″ chain out of my archer chain stock…. I’m going to try out: 25ft Roll 3/8.063 Chisel SKIP TOOTH Chain Saw Chain Archer Australia. Took the chain back to my chainsaw guy, he replaced it with an Oregon chain and chucked the rest of the Archer chain in the bin. “I’ve been looking at too many model numbers of saws and chains lately… It’s a 362CM. I did end up running the Archer chain on it and split up maybe half a dozen 30” cookies.
I have had quite a few problems hand filing stihl chains. I think archer chains have had good and bad batches. Think everybody takes a few swipes off rakers when they get a new chain.
After a tank of fuel, the chain held it’s edge well and was still cutting like new. We normally retension new chains after 5 mins of cutting. We did not retension this chain so we could assess the initial stretch.
is archer chainsaw chain any good Related Question:
Where is Archer chainsaw chain made?
Designed and manufactured by Australian owned company PMD international on their own machines in China. Archer the choice of professionals who demand an economically priced proven quality saw chain, constant from loop to loop, that gets the job done.
What is the fastest cutting chain for a chainsaw?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
Are laser chainsaw chains any good?
Laser chain is a fast cutting, professional quality saw chain with superior strength and durability • Chromed cutters with ramped depth gauges for longer life and smoother cutting performance • Available in chisel and semi-chisel cutter configurations • Safety styles meet all ANSI standards for low kickback chain •
What is the difference between full chisel and semi-chisel?
The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
Who makes the most reliable chainsaw?
STIHL are still the number one selling chainsaw brand in the USA. The Stihl 271 Farm Boss is a great saw for the small farm owner, or if you have a larger section of land with mature trees, and you need a reliable saw that can handle big jobs on a regular basis.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
What chain do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
Where is Prokut chainsaw chain made?
All PROKUT products are manufactured to exacting standards of strength, durability and quality. These products have been rigorously tested in Australia, so you have peace of mind the range can handle all job types.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
Is semi chisel a ripping chain?
A ripping chain is a semi chisel option that’s used on shallow-angle cutters with around 10° cutting angle. It cuts along the wood grain rather than cutting across the pores or veins, which is different from other options available in the market.
What should I look for in a chain saw?
Check for safety features like an inertia chain brake, side chain tensioning and a chain catcher. A saw that is comfortable to use is safer to use. Find a well-balanced machine with a good power-to-weight ratio: light enough to handle with the power to do the job. Ease of use is another deciding factor.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
Are Chinese chainsaws any good?
Inexpensive chainsaws made in China have drawn great interest in the past few years, including brands such as Blue Max, Zomax, and Showbull. It is easy to find these and other cheaply made chainsaws on various internet sites, but it’s typically not worth the risk of a bad-performing saw just to save a few dollars.