Chain oil is applied to the bar and to each individual link in a saw’s chain via a special automatic lubricating mechanism inside the chainsaw. The best oil for a chainsaw chain is chainsaw bar and chain oil. No professional chainsaw supplier, technician, or operator will recommend using motor oil in place of actual chainsaw chain and bar oil.
Chain oil is applied to the bar and to each individual link in a saw’s chain via a special automatic lubricating mechanism inside the chainsaw. The best oil for a chainsaw chain is chainsaw bar and chain oil. No professional chainsaw supplier, technician, or operator will recommend using motor oil in place of actual chainsaw chain and bar oil.
All of my crew members grab the chain oil as soon as I talk about lighting a fire. When the wood is dry and there is no rush, I show them we can do without it but they always have that “Chain oil reflex” even if the tinder could light with just a spark! At least, I managed to get rid of the useless and dangerous “Gasoline reflex” some had.The traditional recipe for a quick fire in harsh conditions where I work: Mix 3/4 chain oil with 1/4 2-stroke gasoline in a disposable cup and pour it on an old synthetic rag. I have seen worse: when I was in Canada, my boss would pour oil in a tire, spin it around and stuff it with newspaper… It got the fire going in a few seconds, even over 4 feet of snow.
HAZARDS IDENTIFICATION Based on available information, this material is not classified as hazardous according to criteria of Safe Work Australia. Suitable extinguishing media: If material is involved in a fire use water fog, Product Name: Chain Saw Bar Oil Issued: 2020-11-25 Reference No: PEN0013602 Version: 9.0 Page 2 of 7 Safety Data Sheet alcohol resistant foam, standard foam, dry agent. Store away from incompatible materials described in Section 10.
If you don’t have bar and chain oil, regular 10w30 motor oil can be used on the chainsaw. You can use canola oil if you don’t have access to vegetable oil. Canola oil does a better job of handling cooler temperatures than vegetable oil.
is chainsaw bar oil flammable Related Question:
Is Bar and chain oil hazardous?
This product is not known to be a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. Not regulated.
What is chainsaw bar oil made of?
Formula. Chainsaw bar oils are either petroleum-based or bio-based (formulated using vegetable oil). In the course of using a chainsaw, oil sling is inevitable.
What is special about chainsaw bar oil?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.
What’s the difference between chainsaw bar oil and regular oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use 2 stroke oil for chainsaw bar oil?
Can You Use 2 Cycle Oil As Bar Oil? You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.
What is a substitute for chainsaw bar oil?
Vegetable Oil Vegetable oil is one of the safest alternatives available to oil your chainsaw. It is completely non-toxic and biodegradable, and can even be used to trim live trees without danger of hurting you or the plants! And boy is it cheap – you may even have it in your kitchen right now.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
Can I use cooking oil for chainsaw?
Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.
Can engine oil be used as chainsaw oil?
If you find that you have no other option for chainsaw bar oil, motor oil can be used as a temporary measure. In addition to the fact that motor oil is not sticky enough to stay on the chain and bar, it also has a tendency to break. As a result, when you use a chainsaw, the motor oil will fly off as you cut.
Can I use SAE 30 for chain oil?
If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Is 2 stroke oil the same as chain oil?
No, it is not. 2-cycle oil is a gasoline additive that provives lubrication to the internal engine parts since the engine has no oil internally. Bar and chain oil is a much heavier viscosity intended for lubrication of the bar and chain specifically.
How much bar oil should a chainsaw use?
When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.