The reason a special type of chainsaw bar oil exists is that chainsaw chains and bars need a lubricant with certain qualities to keep those parts running smoothly. Motor oil will work to keep your chainsaw from burning up if you don’t have any standard bar oil on hand. Hydraulic oil is similar to motor oil and you can use it as a chainsaw bar oil substitute when you have nothing else available.
You could even get luckier and find a chainsaw bar that qualifies as a universal replacement, but it doesn’t mean it fill fit all chainsaws. It will shed light on among other things, whether chainsaw bars are universal and if at all, there is a possibility of finding a replacement that would fit onto every saw you ever owned. You should not just walk into a chainsaw accessory shop nearby to buy a replacement bar for your chainsaw.
is chainsaw oil universal Related Question:
Can you use any oil for chainsaw bar oil?
Generally, chainsaws can handle a wide range of lubricants. Vegetable and canola oils work well, and automobile motor oil will too, as long as you observe the SAE ratings and use the appropriate oil weight for the season. Always use fresh, never used, oils.
Are all chainsaw oils the same?
Just like your car’s engine depends on oil to keep it running smoothly, your gas-powered chainsaw engine needs oil to operate at its best. Different chainsaws require different oils, and using the wrong oil or not enough oil can cause major problems.
What kind of oil do you use for a chainsaw?
Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
Can I use any bar and chain oil on my chainsaw?
As your chainsaw’s blades rotate, they also fling the oil you are using to lubricate it off into the air. And that means that you and any nearby plants will get that lubricant – and whatever is in it – all over. For safety, your regular bar and chain oil should be non-toxic.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use cooking oil for chainsaw?
Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.
Is chainsaw oil different than motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can you use 2 stroke oil as chainsaw oil?
Modern two stroke chainsaws do not require generic brand oils to operate at temperatures and rpms that are comparable to those of generic brand oils. Our recommendation is to use only high quality two stroke oil designed for air cooled high performance engines when using your modern two-cycle engine.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
Does a chainsaw need engine oil?
To run properly, all chainsaws need two types of oil for different jobs. The first is engine oil. The chainsaw shown here has a two-stroke engine, so it needs two-stroke engine oil mixed with the fuel to help cool and lubricate the moving parts inside the motor.
Does a Stihl chainsaw need oil?
Stihl gasoline-powered equipment uses a 50:1 ratio of gasoline and 2-cycle engine oil. Learning how to mix your fuel properly is important in keeping your chainsaw in excellent condition over time.
What is bar oil equivalent to?
Canola oil is another good substitute when you don’t have access to vegetable oil. It’s able to handle high heat and protect your chainsaw bar and chain from damaging friction. That is only if you keep it well lubricated while cutting. Canola oil is also better at handling lower outdoor temperatures than vegetable oil.
What weight is chainsaw bar oil?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.