Don’t have one of these but do have a 12 inch H&F disc sander which works very well, plus a 4 inch belt/6 inch disc sander. I find the disc sander very useful for getting perfect mitres – the smaller one for inlay banding and the larger one for box sides. The H&F unit has the disc sander in the way of long or wide items, so it was eventually discarded as a possibility.
belt sander belts 100 x 610 Related Question:
How do I know what size sanding belt I need?
dimensions listed width/length) Wrap it around the belt sander the same way you would put a belt on it. Cut the string so the ends meet up and then measure the string from end to end. To determine the width of the belt, you can measure the width of the roller or contact wheel the belt will run against.
What is the most common belt size for a belt sander?
Hand Powered Belt Sander The most common sized belts used on Hand Sanders are 3” x 21”, 3” x 18” and 4” x 24″ sanding belts.
What size belt goes on a Makita belt sander?
Makita P-36924 Makita MAKITA Sanding Belt 100 x 610 MM Grit Size K120 (5 Belts) Red. Learn more about free returns.
How tight should a sanding belt be?
Most wood sanding applications require a belt tension near 40 psi. Because the goal is to keep the belt from slipping, users sometimes err on the side of using too much belt tension. Several problems can result from excessive belt tension.
What is the best speed for a belt sander?
The optimal speed for belt grinders is largely dependent on a number of factors, including type of abrasive grain, grit grade, workpiece material, and more. Generally speaking, a safe speed in most cases is 3,000 surface feet per minute. You can calculate surface feet per minute using the formula SFPM = RPM X .
How much wood can a belt sander remove?
As mentioned earlier, abrasive belts can only remove a certain amount of stock dependent on grit size. With a three-head sander you can run a grit sequence of 100-150-180 and remove approximately 1/32 inch in one pass.
What is better belt sander or orbital sander?
A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
Does Makita have a cordless belt sander?
The new 18V LXT® Brushless Cordless 3/8” x 21” Detail Belt Sander (XSB01) delivers corded performance with cordless convenience for wood and metal applications.
Why does the sandpaper keep breaking on my belt sander?
There are pretty much two reasons they can be breaking so quickly: the belts are old stock (or have been stored in humid or hot locations) or the tension is too high. Or both.
What kind of sanding belts are best for metal?
As high-performance belts, both zirconia and ceramic sanding belts will last longer and remove metal faster than aluminum oxide or silicon carbide sanding belts. Both belts have the ability to resharpen as they wear and both are primarily used on metal applications. In the end, both types of belts are excellent belts.
How do you adjust the tension on a belt sander?
If the belt is shifting toward the side of the sander that the knob is on, then loosen the knob by turning it about half a turn counterclockwise. If the belt is shifting away from the side of the sander that the knob is on, tighten the knob by turning it about half a turn clockwise.
Should you push down on a belt sander?
You do not have to push down on the sander. Pull the sander backward letting the weight and sharpness of the belt cut the surface. Don’t pull back and then tip the sander off the edge or you’ll cut off too much wood and need to build it back up with putty.
Can you use a belt sander against the grain?
Because they have a lot of power and can handle coarse grits, they excel at the rapid removal of wood. Also, unlike orbital and vibrating sanders, the sanding action is linear, so even with coarse grits you can sand with the grain and get a good-looking result.
How many RPM is a belt grinder?
Belt Sander/Grinder provides motor speed of 3,600 rpm.
How do I determine my belt speed?
Calculate the belt velocity by multiplying the circumference of the pulley by the speed of the pulley. For example, the drive pulley has a circumference of (Pi)(D2). This equals 2(Pi). The speed of the pulley is 1,800 rpm.