The battle between the two should-have band saws Powermatic PM1500 Vs Laguna14bx must have interested many saw-lovers. Compared to the 1.75 Hp motor of the Laguna MBAND14bx110-175, the Powermatic can manage more lumbers at the same time and also run for a more extended period. I sincerely hope that this Powermatic PM1500 Vs Laguna14bx Review would be a great help for you in figuring out your most trustworthy partner.
“Thanks for everyone’s input. I’m thinking I will be ordering the Powermatic. Since my old one is only 2.5 years old. I like the fence system better on the Powermatic and by the time I load the laguna up with the additional two years, driftmaster fence and 8” tall fence. Hopefully when my other saw gets fixed I will be able to recover some of the cost.
I don’t think you can go wrong with either, but if it were me I’d do the Laguna. I have a Laguna LT24 currently and it’s a beast. The Powermatic is a sweet machine though, and I wouldn’t turn it down.
The features of the laguna big saws are really nice with the ceramic blocks and make blade changes a dream. “In my post above, #9 in the thread, I miss-typed the saw model number of my Rikon. I selected the Rikon 10-326, which is a 14” steel frame saw. As far as I determined, none of the Rikon and Laguna saws are built so that you need to remove the table to change the blade.
To help you make your purchase decision I researched woodworkers’ and expert reviewers opinions on 14 inch bandsaws in 30+ different articles and forum threads. Notable PWBS-14CS Reviews:”It ranked high for performance among its cast-iron brethren, but the wheels were misaligned by more than 1/8 in. on the machine we tested.”Thomas McKenna of Fine Woodworking on the PowermaticRanked 2nd of 8 by Fine Woodworking ReadersPOWERMATIC PWBS-14 Bandsaw Recommended by Tom Hintz >>Tom Hintz on video about the PMA “Top 3” 14 inch band saw at 3luxe. Notable G0457 Reviews:WoodNet Tool Review – Grizzly G0457 14″ Deluxe Bandsaw >>”Dust collection works well, though installing a blade is tough. The tension is easy to set and adjust, with an intuitive quick-release mechanism. The tracking knobs are a good size. The tall fence included with the saw slides smoothly, locks surely, and is great for resawing. Curve cuts were no problem, and resaw cuts were of fine quality.”Thomas McKenna of Fine Woodworking on the G0457 >>8th of 8 by Readers, Awarded Best Value 14 inch bandsaw by Fine Woodworking.
If you’re looking for a bandsaw to make cuts on thinner pieces of wood and don’t plan on doing any resawing, then the 1 1/2 or 1 3/4hp motor offered on many of the 12″ and 14″ bandsaw will be more than enough. While this bandsaw may be out of many woodworker’s price range it is the best combination of features and price that we can recommend in a full sized bandsaw. The Rikon 10-326 Deluxe Bandsaw is a pretty similar bandsaw to both the Laguna 1412 in style and specs.
bandsaw mill vs swing blade Related Question:
Is a bandsaw mill worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
Who makes swing blade sawmills?
The circular swing-blade portable sawmill has been Lucas Mill’s flagship product for over 23 years. These machines are designed to suit the harvesting of both hard and soft timber species, and can be operated on any terrain.
What is the best blade for a sawmill?
9° Sawmill Blades – Ideal blade for lower horsepower (24HP and below) sawing frozen wood, hardwood, and small diameter logs. 10° Sawmill Blades – Very popular all-purpose blade for sawing mixed hardwoods such as red oak, cherry, walnut, soft maple, and poplar.
How long do bandsaw mill blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Is owning a sawmill profitable?
It’s true that owning a sawmill can be a very lucrative business venture, and in the right circumstances it is not only possible but very likely to earn you a significant profit on a regular basis. However, it’s worth keeping in mind that building a business with only profit in mind is not sustainable in the long term.
How much does a good sawmill cost?
New portable sawmills range in price from less than $4,000.00 to over $80,000.00 depending on the amount of production you need.
How much is a swing blade sawmill?
Swing blade mill prices can range from $6,000 to $40,000 depending on the model and options you choose and they retain their value very well. You can expect to sell a well maintained used mill for anywhere between 70% and 90% of its original price.
What is a swing blade?
A swingblade sawmill utilizes a single circular sawblade which pivots about a 90 degree point, to saw in both vertical and horizontal planes. The single blade travels horizontally in one direction down the log, and returns in vertical position, thus removing a sawn piece of timber.
How much does a turbo saw mill cost?
$35,000 USD. M12-37A – 12″ x 12″ standard cut, 11″ x 24″ double cut, fitted with Kohler CH1000 37hp (gross) engine. $37,000 USD.
What kind of steel are sawmill blades?
Carbon steel is the most common metal used to manufacture sawmill blades and performs well for high production.
How thick is a sawmill blade?
Thinner plates can be used for lower density woods. If the plate is too thin, however, it will vibrate and the saw will wander in the cut. The plate of a circular saw blade is typically 1/8 inch to 1/4 inch thick.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
How many times can you sharpen a bandsaw mill blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
How many times can a bandsaw blade be sharpened?
It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether. You should typically be able to get two to three sharpenings before you need to change your blade completely.
How long should pine dry before milling?
Depending on the thickness of the lumber and where you live, weather and time of the year, it will take anywhere from 6 weeks to 4 months. Most lumber is in the 1” to 2” thickness and the time above applies to thicknesses. Drying cants, timbers, posts will take considerably longer.