The following characteristics are present: wear-resistant, close to the sand surface, not easily detachable, maintain sharpness, long wear.
Because the sand has a finer particle size than the nickel-plated layer, it is possible to achieve a higher finish on the base part of the nickel-plated layer, which is bright and shiny.
Carbide is used for sculpturing, dressing, precision grinding, and internal grinding in ceramic, glass, precious stone, alloy, and a variety of other abrasive materials, including diamond.
This diamond Head set is intended for use with high-speed rotary tools, grinders, and drills, among other applications. If you’re a DIY enthusiast, hobbyist, or craft enthusiast, this set of diamond burrs may be able to enhance the functionality of your rotary tool even further.
Installable on electronic grinders, hanging mills, and hand electric drills, among other things (not included here).
For example, it can be used to grind common flat glass, frosted glass, sandblasted glass, embossed glass, filament glass, insulating glass, laminated glass, and glass brick, among other things. Between 80 and 120 granularity, smooth glass surface is used for this product.
2. It is used for the cutting and grinding of various types of stone, including granite, basalt, limestone, dolomite, sandstone, and marble. The grain size ranges between 36 and 60 microns, which is sufficient for sharpness, and the polishing speed is fast, the working time is long, and the edge does not collapse during the polishing process. After the stone has been polished, it should be smooth.
3. For the glaze, underglaze, blue and white, pink ancient, wall tiles, floor tiles, sanitary ware, ceramic handles, silicate-containing products, silicon, and other materials polished, particle size between 60 and 80 Sharp, short working hours, no chipping, and other application. After smoothing the surface of ceramic products, they are polished.
4. Other metal products, such as aluminum, stainless steel, and other similar materials, can also be polished. If you’re grinding fast steel and tungsten steel, you’ll need custom plating CBN sand, which is more sharp than regular CBN.
Metal and diamond are the materials used.
0.3 inch / 8mm diameter of the head “in addition to this, if you have any questions, please don’t hesitate to contact me at [email protected.
3.12mm / 0.12 inch is the diameter of the shank..
Size: 12mm / 0.5″ Head Length: 0.5” “in addition to this, if you have any questions, please don’t hesitate to contact me at [email protected.
45mm / 1.8 inches in total length.
Weight: 58 gram.
10 x Diamond Mounted Points are included in the package.
