You can buy very inexpensive angle grinder tool, but for frequent use or for demanding jobs like cutting stucco or cement, I’d recommend spending a little more for a grinder with a more powerful motor. Outfitted with a grinding wheel, an angle grinder is a great tool for restoring edges on rough-and-tumble tools like hoes, shovels and ice scrapers or for the initial grinding of axes, hatchets and lawn mower blades. Finally, with the grinder off, rest the grinding wheel against the blade and adjust the angle of the grinder to match the blade’s bevel.
We got our Pro team together to give you some tips on how to use an angle grinder from basics to some advanced techniques and shortcuts. Additional Pro Tips on How to Use an Angle GrinderBefore applying the grinder to the work surface, allow the tool to reach full speed. If you’ve got any tips or tricks on how to use an angle grinder, feel free to leave your input in the comments section below!
The secret to successfully using an angle grinder is choosing the right type of cutting disc. Consider how much wood you want to remove and how fast to define the correct cutting disc for your needs. The angle grinder size is determined by the size of the disc, not the length of the tool itself.
If you need to use the grinder for more than an hour, it may be better to invest in a corded angle grinder. The rapidly rotating disc on an angle grinder doesn’t just smooth, polish, and grind away metal, it can also be used for cutting through metal. Equip the angle grinder with an abrasive grinding disc and ensure that the blade of the tool is properly secured in a vise so that you can focus on controlling and steadying the movement of the grinder.
Angle grinder imply the use of various angle grinder disk types. For big jobs, the best angle grinder to use is the electric grinder because it’s more powerful and covers a large surface area. To avoid the grinder slipping and causing you an injury, hold the grinder across the body of your work in the direction of the handle.
learn how to use angle grinder Related Question:
Do you need training to use an angle grinder?
Thanks to the Provision and Use of Work Equipment Regulations (PUWER 98), everyone who uses an angle grinder, petrol-driven saw or bench grinder for work needs to be properly trained to do so.
How do you use an angle grinder for the first time?
Angle the grinder disc with the cutting edge of the blade or tool you’re working on. Start the grinder and let the disc spin at full speed. Move the disc steadily across the blade, applying only the lightest pressure. Move the grinder from the handle end of the blade and up to the tip of the tool.
Is it hard to use an angle grinder?
But for quick, rough cuts, it’s hard to beat a grinder. I’ve used an angle grinder to cut rebar (Photo 3), angle iron, rusted bolts (Photo 4) and welded wire fencing. Use an inexpensive cutoff wheel for these and other metal-cutting tasks.
How do you grind with an angle grinder?
For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface. Position the blade guard at the back towards your body. Use a smooth back and forth motion to guide the flap disc over the material.
What PPE is required for grinding?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work. Ensure the floor around the work area is clean.
What direction should you feed the cutting disc into the workpiece?
The direction of the cutting motion is important. Always feed the cutting disc into the work so that it cuts in an upward direction.
What is the purpose of angle grinder?
An angle grinder is a handheld power tool that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing. The most common types of angle grinders are powered by electricity; either corded or battery powered.
Can angle grinder be used as Sander?
When you need to remove or sand a lot of surface wood away, turning your angle grinder into a sander is the easiest and most cost effective way to do it.
Can you use a cut off wheel on an angle grinder?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
Can you use water with an angle grinder?
So, Can You Use Water with an Angle Grinder? Absolutely! But not straight out of the box. With some accessories and a bit of knowledge on how to mitigate the risks, you can use an angle grinder with water to cut tile, brick, or any type of masonry to minimize dust and maximize blade life.
What are most angle grinder injuries from?
Most angle grinder injuries are from metal particles lodging in the operator’s eye. However, the most serious injuries are from kick-back, where the disc is thrust back violently towards the operator. Angle grinders used with cutting discs expose workers to a range of severe additional hazards.
Should you wear gloves with an angle grinder?
My answer is simple, any glove of any design and/or material is better than no glove at all. The glove you use is not supposed to provide you with 100% safety especially if you do not use common sense and a good work ethic.
Should you wear gloves when grinding?
Personal protective equipment, including safety eyewear and a faceshield, should be worn when operating a grinder. Hearing protection also may be required. Gloves should be worn only if using a tool grip of adequate length to keep hands several inches from the face of the stone.
Can you use a grinder without a handle?
grinder. Don’t use the grinder without a side handle. Use both hands. Neveroperate a grinder in a one-handed manner; should the wheel jam, it would be almost impossible to maintain control of the grinder, even if it were equipped with a slip clutch.
Should you push or pull an angle grinder?
You should work with a straight grinder when cutting using the side (of the bit) and a 90-degree grinder when you are using the front (if possible). That way, you’ll have more control of the thrust and you won’t worry about the tool grabbing or pulling at you.
