Cool Blocks aren’t particularly expensive, and work exceptionally well I wouldn’t bother making my own. Have your say… Forum Topics Woodworking Skill ShareYour woodworking skills are displayed for several lifetimes in each project. Show us your jigs, share your tips, strategies and, of c… 1908 Wood & LumberDifferent wood requires different woodworking strategies – from cutting to finishing.
Aftermarket graphite and ceramic guide blocks work well, but before you buy, consider making your own blocks from any dense hardwood, such as maple. When worn, hardwood blocks can be sanded or trimmed true. After cutting the blocks to fit, I stand them in a small container with some WD-40 to allow the end grain to absorb extra lubricant.
If you have an unusual, custom, unique or vintage band saw you can choose from 2 new sizes:CB51010BL 1″ x 1″ x 1″ Cool Blocks or The SLAB CB-SLAB 6″ x 1-3/4″ x 1/2″ Customizable to fit various saws. To modify for your specific band saw: After carefully measuring the size of your saw’s guide blocks, saw each Cool Block to that exact size using a very sharp, thin kerf blade. CB-SLAB Contains 1 slab 6″ x 1-3/4″ x 1/2″ To modify for your specific band saw: After carefully measuring the size of your saw’s guide blocks, saw each Cool Block to that exact size using a very sharp, thin kerf blade.
If the price for Cool Blocks was off the scale, then I would use Hard Maple blocks and see how well they work and also try Maple blocks with Pam spray. Spending $10 to $20 on Wax-like blade lubricant, and Cool Blocks in-order to get more life out of $200 worth of blades, seems though, like a pretty good investment to me. 09-05-2007, 5:57 PM #15. “Frank, cool blocks either purchased or homemade work great for burrying the blade. if you use 1/4” or smaller blades it`s nice to totally surround the blade for support…02 tod.
Cool Blocks are made to replace the original metal guide blocks which came with many older bandsaws. Cool Blocks are NOT designed to replace roller bearing blade guides. Cool Blocks eliminate friction and heat caused by metal to metal contact so blades run smoother, cooler and far quieter than with metal block guides.
Bandsaw Cool Blocks Blade Guide Cool Blocks blade guides are made of a special, non-metallic material that lubricates your bandsaw blades as they cut, keeping them cool and reducing the chance of premature breakage. Since they won’t damage blade teeth, you can really snug them down for added stability when working with smaller blades. Cool Blocks improve the cutting performance of any blade width, but are required for blades 1/16″ to 1/8″ wide for tight radius work.
make bandsaw cool blocks Related Question:
What are bandsaw cool blocks made from?
Cool Blocks are made of a non-metallic composite material– Graphite Impregnated Phenolic Laminate with three synthetic dry lubricants.
Where are Olson scroll saw blades made?
Olson Saw Company continues to manufacture in Bethel CT, making a wide range of band and scroll saw blades, band saw and power scroll saw accessories, handheld saw frames and other wood working accessories.
How many teeth does a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
What is a skip tooth band saw blade?
Skip tooth blades have widely spaced teeth at a 0 degree rake angle to prevent clogging when cutting soft wood, non-ferrous metals and plastics. Hook tooth blades have a deeper gullet—that is, larger teeth—and a positive 10 degree rake angle. This helps the blade to feed into the material more aggressively.
Are Olson scroll saw blades good?
Olson Saw Pin End Scroll Saw Blades are an excellent blade collection for any scroll saw user. This collection of a dozen standard in two sizes and six skip tooth blades is both easy to use and versatile, tackling hard and softwood, plastic, and even non-ferrous metal with ease.
What is precision ground blades?
Precision Ground Tooth PGT Scroll Saw Blades are the best blades available! Tested and endorsed by experts, PGT blades outperform and outlast all other blades. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts.
Do bandsaw blades have set?
Re: set in bandsaw blade Set is important to keep the sides of the band from rubbing in the kerf and also to help guide the band so that it doesn’t follow the grain so bad. How much set depends on the type of wood, but it also depends on the thickness of the blade.
What is the kerf of a bandsaw blade?
Kerf: Amount of material removed by the cut of the blade. 5. Tooth Pitch:The distance from the tip of one tooth to the tip of the next tooth.
Why does my bandsaw blade wander?
If the wheels are worn and do not have a distinct top to the crown then the blade will not know where to go, and may wander around. This of course can cause poor cut quality and difficulty in setting the guides.
Which way do the teeth face on a bandsaw?
The teeth on the bandsaw blade should face down so that the cutting action is from the top of the material to the bottom.