Access to this page has been denied because we believe you are using automation tools to browse the website. Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
makita 3 x 21 belt sander Related Question:
Does Makita make a belt sander?
The new 18V LXT® Brushless Cordless 3/8” x 21” Detail Belt Sander (XSB01) delivers corded performance with cordless convenience for wood and metal applications.
Does Bosch make a belt sander?
The Bosch Belt sanders Bosch belt sanders offer high power and a high removal rate with comfort and ease. Ideal for sanding larger flat surfaces – tackle a variety of tough sanding jobs from work on wooden doors and beams to plaster and metal.
Do I need a variable speed belt sander?
VARIABLE SPEED. A belt sander excels at removing a lot of material at high speed. But you should also be able to use your sander to do controlled sanding. That’s when a variable speed motor can be helpful.
How much tension should a belt sander have?
Most wood sanding applications (such as mould sanding using narrow cloth belts) require a belt tension of approximately 40 psi. However, there are some special exceptions. For example, abrasive planing operations using coarse grits typically demand belt tension in the range of 70 to 90 psi.
Does Bosch make a cordless belt sander?
Bosch Professional Gss 18 V-10 Cordless Orbital Sander (Without Battery And Charger) – L-Boxx.
What is the difference between a belt sander and an orbital sander?
The common differences between all belt sanders and orbital sanders are: A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
Should I get a belt sander?
Good for initial wood work, a belt sander is perfect for getting wood ready to be worked on. A belt sander can remove any material off wood in no time.
How do I choose a belt grinder?
Motor Size To effectively grind steel, you need high belt speed with the ability to exert high pressure on the belt. You won’t be able to accomplish grinding very well if you don’t have a large enough motor. As a general rule of thumb, you need 1 horsepower of motor power for every inch of belt width at 72” in length.
Why does the sandpaper keep breaking on my belt sander?
There are pretty much two reasons they can be breaking so quickly: the belts are old stock (or have been stored in humid or hot locations) or the tension is too high. Or both.
How much wood can a belt sander remove?
As mentioned earlier, abrasive belts can only remove a certain amount of stock dependent on grit size. With a three-head sander you can run a grit sequence of 100-150-180 and remove approximately 1/32 inch in one pass.
Can you use a belt sander on wood?
Belt sanders excel at the rapid removal of wood, making them the best handheld power tool for leveling and smoothing rough boards. Start at an angle to the grain for aggressive leveling, then finish with the grain. 80-grit is good for starting, then switch to 120-grit.
What determines the size of a portable belt sander?
Wrap it around the belt sander the same way you would put a belt on it. Cut the string so the ends meet up and then measure the string from end to end. To determine the width of the belt, you can measure the width of the roller or contact wheel the belt will run against.