In addition to being powerful, this motor can run at 5,800 RPM and last for a long time on the job site.
The lower guard design makes it easier to make bevel and small cuts.
Cutting power: 2-3/8″ at 90° and 1-3/4″ at 45.
Two LED lights built in make it easier to see where you’re going to cut.
For better handling and performance, the design is well-balanced.
The shaft lock is in a good place so that it’s easy to change the blade.
The AC/DC switch can be used with different types of power sources.
An overview of what this item is abou.
With the 7-1/4″ Circular Saw (model 5007F), Makita thought about professional framers. This saw is powerful but also easy to use and has great balance on the job. If you need to frame or cut something, the 5007F is a great tool for you. All of the parts of the 5007F are made with ball bearings, and it has a heavy-gauge aluminum wraparound base that makes it more durable and straighter cuts. It has a powerful 15. 0 AMP motor and a high power to weight ratio. The 5007F can cut 2-3/8″ at 90° and 1-3/4″ at 45°. It can also bevel up to 0°-45° for the most common angles, so it’s great for cutting. Large and easy to read marks were added to the depth and bevel scales on the Makita saw to make it easier for people to use. With a flat motor housing design, blade changes are easier because they are more stable when changing blades, and there is a convenient shaft lock that makes it easy to change blades. With two built-in LED lights and a built-in dust blower, you can see better. There are a lot of different types of wood that can be used to make the 5007F. It can be used to make walls, siding, roofs, and floors. There are a lot of people who need a 7-1/4″ circular saw that is the best in its class. This saw is great for framers, builders, masons, carpenters, and general contractors.
There is a Manufacturer.
The 5007F 7-1/4-Inch Circular Saw was made by Makita after listening to professional users. It has features that are easy to use, as well as power, weight, balance, and job-site durability. The Makita-built motor is designed for a wide range of power.
Circle saws have been around for a long time. I’ve used them since I was about 12. First saw: My dad had one of these, and I learned how to use it in the mid-90s.. Out of high school, I worked for Milwaukee tools for four years as a sales rep. I’ve used a lot of different circular saws, both good and cheap. This Makita, as well as other Makitas I’ve used before, is a great saw. You could cut butter with a hot knife right out of the box. In this case, there was no sense of binding or struggle, and it just cut. Use: I used the factory blade with no setting up and it was a pleasure to use. I’m the third person in my family to own and use a Makita saw, so I’ll never own another circular saw other than a Makita.
