15 AMP motor: 2,300 RPM for enough power to cut through pressure-treated lumber.
This machine cuts 6x material at 90° and 4x material at 45° all in the same pass.
It weighs only 32.1 pounds, which makes it easier for the person who is using it to move around.
Electric brakes are used to get the most done.
Cutting large trees, pressure-treated wood, and wood logs with this saw is very good for the job.
An overview of what this item is abou.
Low noise level: 87dB. Electric brake for maximum productivity. Low noise level: 87dB. Blade stabilizer for stable cutting performance. Depth control lever for convenience and secure adjustments. Large support handle for increased operator comfort and control. Carbide tipped blade. Specs. 15.0 AMP, 16-5/16 AMP “1” blade diameter, 1″ arbor, max cutting capacity: 90 degrees- 6-1/4″, 45 degrees-4-3/16″, no load 2,200RPM, 1,800 watts out, 24-1/4″ long, and 32.1 lbs. Blade length: 24-1/4. Carbide-tipped blade with 32 teeth. #6 hex wrench. Rip fence. This package comes with.
There is a Manufacturer.
This circular saw from Makita has a shaft lock that makes it easy to change blades quickly, a large depth control lever for safe adjustments, and a large trigger handle that makes it easy to work with or without gloves. Operator comfort is also helped by the large support handle on this machine. It has a noise level that isn’t too loud, a Makita motor that can do a lot of work, and a blade stabilizer that keeps the blade moving in the same direction and cuts very well. An easy-to-use lever lets you change the angle of the blade, and the blade is tipped with carbide.
FEATURE.
At 90 degrees, the large blade can cut 6-1/4″, and at 45 degrees, it can cut 4-3/16.
For ease of use, it only weighs 28.7 pounds.
Electric brakes are used to get the most done.
The motor is very powerful and can put out 1,800 watts at full power.
In order to keep things quiet, the noise level is only 87dB.
For stable blade rotation and better cutting performance, use a blade stabilizer.
Large depth control lever for easy and safe adjustments.
Large support handle for more comfort and control for the operato.
One end of the blade is made of carbide.
What’s inside the box.
Blade with carbide tips on the blade has 32 teeth and has a carbide tip (A-90956.
#6 hex wrench (783204-6.
Remove the fence (164019-4.
Specification.
The blade is 16-5/16 inches wide..
1.
6-1/4; 4-3/16.
During no-load speed: 2,200 rp.
One thousand-eight hundred watt.
Amps: (115V) 15.0 watt.
All the way around: 24-1/4 inche.
The weight of the package: 28.7 pounds.
37.4 pounds.
Aww, that’s so cool. Do you need something that can cut through railroad ties like butter. Look no further, then. The strong motor and carbide-tipped blade work together to make magic happen, like a spell. My 7 1/4-inch saw had a hard time cutting around the outside of a 7-by-9-inch railroad tie with a lot of different cuts “When I was at work, a coworker told me about this thing. It was so big that I had to finish it off with a sawzall or a chisel, which made me tired. In this case, the is the answer. It sounds like a big “Sawmill” motor when it’s running and it’s not noisy at all. In fact, I took the ear plugs off after a few cuts because they weren’t needed at that point. I’d also recommend wearing safety glasses, though, because this machine will make a lot of shavings when you cut through a lot of wood. Even though you can do it with your thumb without gloves, it would be easier if the top of the safety switch had a small bump on it. Putting this saw in your hands and watching it work will show you that it’s made to last a long time. It has easy-to-replace brushes and bearings, and its fasteners are all arranged in a way that makes it easy to fix. It’s important to cut slowly on a saw like this one, and to keep the cuts straight so the blade doesn’t get stuck. if you give the blade tips a lot of time to rip through the wood on your big railroad ties. You’ll be very happy with this small hand-held sawmill.
