A powerful 6.6 AMP motor for the most demanding applications is available.
The 2-mode switch is conveniently located and allows for quick mode changes between “Rotation Only” and “Hammering with Rotation” modes.
2 speeds (0-1,200 and 0-2,900 RPM) with variable speed control dial on the side of the moto.
It has a built-in clutch that is designed to reduce gear damage by disengaging gears when the bit becomes stuck.
The work area is illuminated by an integrated L.E.D. light.
Description of the Produc.
There are two modes of operation available: “rotation only” and “hammering with rotation. There are two gear ranges. When using variable speed, you can choose between low 0 to 1200 RPM or high 0 to 2900 RPM torque. When the bit binds, the built-in clutch prevents damage to the gears by disengaging them. Accidental mode disengagement is prevented by using the positive stop mode selector. LED (light-emitting diode) light with a high output for increased visibility on the work surface is used. Handle with vibration-absorbing properties. Drills holes up to 3/4 inch in diameter. Concrete, 1-9/16-inch wood, and 1/2-inch steel are used. Gearcase made of metal. Insulation on both sides. The set includes a side handle that can be rotated 360 degrees, a depth gauge, a chuck key, and a plastic carrying case. There are two modes of operation available: “rotation only” and “hammering with rotation. This product is made in the country of China. This product satisfies the needs of the customer.
The Manufacturer’s Statemen.
An integrated shockproof, high-output white LED light illuminates drilling operations and is designed to last as long as the tool it illuminates. With a powerful 6-AMP motor and a light weight of only 5.1 lbs., this drill zips through those long jobs without causing wrist pain or discomfort. This multi-tasking tool has two different drill modes: hammering with rotation and rotation only, and rotation only. A dependable positive stop that locks into either mode eliminates the possibility of slipping out of gear. When the bit hits reinforcements, a built-in torque limiter prevents the bit from rotating, allowing you to say goodbye to kickback. This drill also includes a large trigger switch and a side handle that can be rotated 360 degrees for increased comfort and adaptability. To use the device continuously, simply press the recessed lock-on button. The use of all ball bearings in Makita’s drilling machines results in smoother drilling and longer motor life. Because of Makita’s ergonomic design, this drill is easy to handle and comfortable to hold.
FEATURE.
An integrated shock-proof, high-output white LED light illuminates the drilling edge and increases visibility, with a bulb that will never need to be replaced for the duration of the tool’s useful life.
The lightest and most powerful tool on the market, with a 6.6 amp motor (5.1 lbs..
There are two different modes: hammering with rotation and rotation only.
Positive Stop Mode is a mode that prevents a negative outcome. Accidental mode disengagement is prevented by the selector.
Torque incorporated into the desig. When hitting reinforcement, the limiter stops bit rotation in order to prevent kickback.
For added comfort, a large trigger switch and a side handle that can be rotated 360 degrees are provided.
For continuous use, a lock-on button has been recessed.
Construction with ball bearings for increased motor lif.
Comfort and control are enhanced by the rubberized grip, which also helps to reduce operator fatigue. Ergonomic and well balanced desig.
The air vent holes provide the necessary ventilation while also protecting the motor from dust and dirt.
What’s Included in the Bo.
Handle on the side (152521-9.
Depth Gauge (also known as a depth meter) (324219-0.
Case for Instruments (824650-5.
SPECIFICATION.
When there is no load, the engine runs at low speeds of 0 to 1,200 rpm and high speeds of 0 to 2,900 rpm.
Low – 24,000 blows per minute; High – 58,000 blows per minut.
Concrete 3/4 of a ton’s capacity “; Steel 1/2″; Wood 1-9/16”; Aluminum 1/2.
6.6 watts of powe.
14-1/8 inches in total length.
Weight: 5.1 kilograms.
What a fantastic drill!
