Maximum performance comes from a cast iron pump with a big bore cylinder and piston, as well as a bigger bore and stroke.
With a 1,720 RPM pump, there is a lot less noise. This allows for more displacement at a lower RPM.
Low amp draw cuts down on the chances of tripped breakers and voltage drop, which can lead to premature motor failure.
Oil lubrication makes the pump run cooler and reduces wear.
One-year manufacturer’s warranty on the style:MAC700 air compressor Style.
An overview of what this item is abou.
A cast iron pump with a Big Bore cylinder and piston, as well as a bigger bore and stroke, is the best way to get the most out of it. With a 1,720-RPM pump, there is a lot less noise. This allows for more displacement at a lower RPM. Reduces the number of tripped breakers and voltage drops that can cause motors to fail early. Cooler running pump, less wear. Specs. 2.0 HP; Pump: Oil-lubricated; Tank: 2.6 Hot Dog; Performance (CFM): 90 PSI: 3.3, 40: 3.8; Operating Pressure: (PSI): 0 to 130; Amps: 12.4; Noise level: 80; Size: 18 x 18 x 18 in “Weight in pounds: 52. 1/4 of a gallon “The universal coupler is made of brass.
Amazon.co.
Makita’s 2.0 HP Air Compressor has Makita’s Big Bore engineered pump cylinder and piston. This means it has more power, less noise, and better job site performance. The MAC700 has more power and is more durable when working on a hard job site.
It has a 2.0 HP engine with a big-bore pump.
MAC700 has a 2.0 HP motor. For more compression, faster recovery, and less noise, Makita’s Big Bore pump with a cast iron cylinder has more bore and stroke. The cast iron construction is designed to be more durable even when the job site is rough. MAC700 has an oil-lubricated pump and a large filter for more air intake and better efficiency. It also comes with a lot of space for the filter. The Big Bore oil-lubricated pump is also more efficient. The MAC700 runs cooler and at half the RPM of most other pumps, which means more motor and pump life and less noise. The 2.6-gallon tank can stay at 130 PSI, and it can deliver 40 PSI (3.8 CFM) and 90 PSI (3.3 CFM). There are less chances of tripped breakers and voltage drop, which can lead to premature motor failure, because the low AMP draw. The handle on the roll bar makes it easy to move and protects it from rough jobsite conditions. In addition, there is an oil drain and an oil sight glass, a tank drain valve that replaces the standard petcock design, and finned discharge tubing that better dissipates heat.
Design that can be used for a wide range of thing.
Low noise, high output, and less maintenance are all features of the MAC700. It’s also more durable on the job site because it’s built to last. This is just one more example of Makita’s dedication to cutting-edge technology and top-notch engineering. The MAC700 is just one more example.
How do you know about Makita Big Bore Air Compressors.
Makita Big Bore Air Compressors have more power and less noise for better job site performance. For more compression, faster recovery, and less noise, Makita’s Big Bore pump with a cast iron cylinder has more bore and stroke. The cast iron construction is designed to be more durable even when the job site is rough. All Makita Big Bore Air Compressors are oil lubricated and come with large automotive-style filters that allow more air in and more air out. Makita Big Bore Air Compressors have more power and last longer than other air compressors.
How do you say this in English.
Makita is a global company that makes high-quality power tools for the workplace. They also have a wide range of industrial accessories. Makita uses cutting-edge technology to make power tools that are smaller and use less energy, but still have the power and results of industrial tools. Makita U.S.A., Inc. is based in La Mirada, California, and has a wide distribution network across the United States. You can call 800/4-MAKITA (800/462-5482) or go to makitatools.com for more information about the company. Makita is the best at making things.
Warrant.
It’s very important for Makita tools to be checked and tested before they leave the factory. If you don’t like any Makita tool you bought within 30 days, you can return it and Makita will give you a replacement or refund. For one year after you bought it, each Makita tool is guaranteed to be free of defects in workmanship and materials from the date it was first bought. You can send the whole tool back to one of Makita’s Factory or Authorized Service Centers if something goes wrong during this one-year period. Please go to makitatools.com for more information.
What’s inside the box.
MAC700 2.0 HP Air Compressor, oil, and 1/4-inch quick coupler.
It was bought in 2006. It still works. I think it’s great. There have been two times when I’ve had to change the pressure switch on it. People who need a new pressure switch don’t have to buy the one made by Makita. This review is to tell people that they don’t have to buy the Makita one. In this case, Makita does not switch. Pressure Switch Control, 95-125 PSI, 4 Port with Unloader LF10-4H-1-NPT1/4-95-125: This is the switch that came with my compressor. It has been adjusted to cut in and out at a higher pressure, so it can be used with more air. You can buy this on Amazon for less than half the price of a switch made by Makita, which you can buy there. The only thing that is different is that the Makita switch has a cut-out pressure of 135 psi. There are two levers on the Lefoo switch. One of them is set to cut off at 125 PSI. There’s nothing you need to do to like the 125 psi cut-out. This step is very simple: Turn the left adjusting screw clockwise until the cut-out pressure that fits your needs is reached. This will also raise the cut-in pressure, so be aware of that as well. You can also switch out the Makita switch with a Sunny SP-204, L4, 4-port, 95-125 psi switch. When you buy this switch, it’s set to cut off at 125 PSI. You can raise it the same way you can the Lefoo switch. To remove the old switch and put in the new one, you have to take off the switch cover and remove the 4 allen head screws that hold the shroud on. You also have to move the shroud back a little so the switch body doesn’t hit the shroud. Notice where the old switch’s gauge, air outlet, and plug are connected. Then move them to the same place on your new switch.
Another thing. This does not mean that you need to buy a new regulator just because air is coming out of the pressure regulator setting knob. It might have become dirty. A simple task if you are handy: You can take the regulator apart and clean it if you are. Check out how the parts work together. Then clean everything, apply some silicon paste to the o-rings, and make sure they don’t get too sticky. Assemble and the. You can learn how to do this here. (It’s for the MAC5200, but the pressure regulator is the same for both of them).
[…
Hope this helps you save some money.
