Heavy-duty applications benefit from the powerful 738 ft.lbs. of maximum torque and the large 1″ square drive capacity.
Impact system with high efficiency (1,500 IPM) and low vibratio.
Brushes that are easily replaceable from the outside, as well as ball bearings that provide longer tool lif.
The side handle can be rotated 360 degrees for the convenience of the operator.
The impact-resistant aluminum gear case with rubber boot protects all metal gears and increases the overall durability of the unit.
Description of the Produc.
The large hammer used by Makita produces more impacts, resulting in greater impact power. It outperforms the competition by a wide margin, with a maximum torque rating of 738 ft./lbs. Because of the reduced vibration, the tool’s life is extended, and the impact-resistant aluminum gear case with rubber bumpers provides additional protection and increased durability. The side handle can be rotated 360 degrees for the convenience of the operator, and the ergonomically designed grip provides greater control and comfort for the operator. Rocker type forward and reverse switches enable efficient one-handed operation, and the sky hook, which is conveniently located to allow for continuous use while also allowing for simple and convenient storage. FEATURE. Large square drive capacity (1″) and 738 foot-pounds of torque make this a powerful choice for heavy-duty applications. Impact system with high efficiency (1,500 IPM) and low vibratio. Rubber boot protects the gear housing, which is extremely durable. One-handed operation is provided by a rocker-type forward and reverse switch. Brushes and ball bearings that are accessible from the outside for longer tool lif. Rubberized grip that has been ergonomically designed for increased comfort, control, and reduced operator fatigu. SPECIFICATION. Capacities. There is no load on the Square Drive 1″. Speed: 1,400 revolutions per minut. 1 500 joules per minute of impac. Torque at maximum capacity: 738 ft/lbs (1,000 Nm. AMPS (at 120 volts): 12. 15″ in length, 18.5 lbs in total weigh.
The Manufacturer’s Statemen.
The large hammer used by Makita produces more impacts, resulting in greater impact power. It outperforms the competition by a wide margin, with a maximum torque rating of 738 ft./lbs. Because of the reduced vibration, the tool’s life is extended, and the impact-resistant aluminum gear case with rubber bumpers provides additional protection and increased durability. The side handle can be rotated 360 degrees for the convenience of the operator, and the ergonomically designed grip provides greater control and comfort for the operator. Rocker type forward and reverse switches enable efficient one-handed operation, and the sky hook, which is conveniently located to allow for continuous use while also allowing for simple and convenient storage.
FEATURE.
Large square drive capacity (1″) and 738 foot-pounds of torque make this a powerful choice for heavy-duty applications.
Impact system with high efficiency (1,500 IPM) and low vibratio.
Rubber boot protects the gear housing, which is extremely durable.
One-handed operation is provided by a rocker-type forward and reverse switch.
Brushes and ball bearings that are accessible from the outside for longer tool lif.
Rubberized grip that has been ergonomically designed for increased comfort, control, and reduced operator fatigu.
SPECIFICATION.
Square Drive 1″ has the following capacities.
No-load speed: 1,400 revolutions per minut.
1 500 joules per minute of impac.
700 ft/lbs (1,000 Nm) is the highest possible torque.
AMPS (at 120 volts): 12..
15″ in lengt.
Approximately 18.5 lbs. in net weight.
It was not nearly as effective as I had hoped.
I wanted to use it to open rail car doors, but it requires more spin before it hammers, and there is no torque to it.
