A small design makes it easy to cut close to the edge of a piece.
In this case, you can set the speed (0 to 3,000 strokes per minute) and the length (1/2) of the strokes “length of the cu.
Makita’s unique dual-position on/off switch can be used with either a paddle or a trigger switch.
A “tool-free” blade change system makes it easier to install and remove blades quickly.
15-5/8 inches wide is a small size for a table or desk “long; weighs only 3.9 pounds (with battery) for easy use.
bare tool styl.
Makita’s XRJ01Z 18V LXT Lithium-Ion Cordless Compact Reciprocating Saw is a great tool for small jobs (Tool Only). There are two different Makita XRJ01 and XRJ01Z drills that can go at different speeds (0 to 3,000 strokes per minute) and have a 1/2-inch bit “For faster and more efficient cutting, the length of the stroke should be long enough. Makita’s unique dual-position on/off switch can be used with either a paddle or a trigger switch. The “Tool-less” blade change system makes it easier to install and remove blades quickly, which means more work can be done. At 15-5/8 inches long, it is very small “long; weighs only 3.9 lbs. for easy use. LED lights up the work area. Rubberized soft grips make it easier to work on the job. It’s good for a lot of different cutting jobs. The LXT Lithium-Ion battery has a longer run time, a 5x lower self-discharge rate (so it can be used at any time), and 16 strong contact terminals (for constant high power). The 30-Minute Rapid Optimum Charger communicates with the battery’s built-in chip during the charging process to make sure the battery lasts as long as possible by actively controlling current, voltage, and temperature. The 30-Minute Rapid Optimum Charger comes with a built-in fan to keep the battery cool so it can last longer and do more work. The charger got the ENERGY STAR label because it met strict energy-saving standards set by the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE). It comes with a three-year warranty on the tool and a one-year warranty on the battery and the charger. As a single tool. Note: Batteries and chargers are not included with this product. I’m a 100% Makita fan, and I use them every day at work. This saw, on the other hand, is a “gutless wonder. To cut copper pipes, I bought this tool. I thought I would cut them from 1/2 inch to 2 inches with it. Despite having a brand new blade, it takes a long time to cut through 3/4-inch copper pipe, and even if you put a wood blade on to cut 2x4s, you could probably chew them in half faster than this saw can cut them. This saw was a real let down. When my coworker used his Milwaukee and I used the makita, both 18v, he was able to cut through a 2 inch copper pipe 4 times in the time it took me to cut through once. This is why you should buy Milwaukee.
