The motor is made by Makita and has 3, 600 RPM, which makes it faster to cut through a wide range of metals.
At 13-3/4″ long, it’s small and easy to use. It only weighs 5.7 lbs. For less operator fatigu.
The work area is lit up by a built-in LED light.
The handle on this tool has a soft grip that makes it easier to work.
Using the Lxt Lithium-Ion battery and the Rapid optimum charger, you get 430 percent of the battery’s life and three times more cycles.
bare tool, no battery: this is the styl.
The Makita 18V LXT Lithium-Ion cordless 5-3/8-inch metal cutting Saw brings cutting power to the job site. It runs on 18V LXT Lithium-Ion battery. The XSC01Z has a Makita-built high-torque motor and a small design that can be used for cutting a wide range of metals. You can cut faster through unistrut, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more with the XSC01Z’s high-torque motor.
My job in the electrical field has been going on for 28 years, and I cut metal all the time. This thing is great.
As an experiment, I took a piece of mild steel that was 3/8″ thick and looked at it. In the end, it made a 3″ long cut faster than a cutting wheel could have done. I took it slow.
I would also use it to cut conduit, but there isn’t enough to see to see if you hit the mark. Uni strut is the best choice for it.
I used it to do some work. I cut off 20 pieces of conduit in a row about as quickly as I could push it through.
It’s not the best thing for everything, but it’s good at what it’s made for.