Removal of the magazine is simple, resulting in less storage space.
Magazine with a capacity of 50 staple.
Compatible with Malco HR4 Hog Ring Staples (1-3/4-inch, 30 mm).
Durable and lightweight, with a simple spring-actuated action for simple operation.
Handle openings that are easy to grasp, with non-slip rubber insert.
Description of the Produc.
Installing Malco HR4 (1-3/16 inch, 30 mm) Hog Ring Staples capable of gripping a combination of 9-gauge (3.8 mm) chain link and 7-gauge (4.6 mm) tensioning wire is a snap with the HRP4 Chain Link Fence Stapler, which works quickly to complete the job in a single pass. Hog Ring Staples are contained within a magazine.
The Manufacturer’s Statemen.
Installing Malco HR4 (1-3/16 inch, 30 mm) Hog Ring Staples capable of gripping a combination of 9-gauge (3.8 mm) chain link and 7-gauge (4.6 mm) tensioning wire is a snap with the HRP4 Chain Link Fence Stapler, which works quickly to complete the job in a single pass. Hog Ring Staples are contained within a magazine.
Just before the feed channel enters the crimper jaws, it is crimped down a little bit further. It had been over-crimped to the point where the hog rings were unable to feed down the channel. It was necessary to file down the crimp in order to achieve reasonably smooth hog ring feeding. I understand that this is a low-volume tool, but I believe that for the price, it should be manufactured with tighter tolerances than it currently is.
In addition, there is no stop when crimping to a “perfect triangle,” so you must be careful not to over-crimp or you will end up with a squashed triangle (which might or might not be a bad thing, but it is unsightly and the material does not slide through an over-crimped hob ring).
