If you have a FoxAlien 3018-SE CNC router machine, this spoilboard is made for you.
The spoilboard is put on the worktable so that the router bit doesn’t damage the aluminum worktable when engraving and cutting are done on it.
11.81×7.09×0.47 inches/300x180x12mm in length, width, and heigh.
It’s made of high density MDF board.
The spoilboard comes with M6 thread and t-nuts, which work perfectly with 3018-SE because they have the same size.
Feature.
This piece of MDF is on the work table of the 3018-SE CNC router.
It can protect the metal work table from being scratched or cut while engraving or milling on it.
11.81×7.09×0.47 inches/300x180x12mm in length, width, and heigh.
It’s called a “package list..
1 piece of MDF spoilboard for the FoxAlien 3018-SE CNC route.
Spoilboard is flat if you take out the inserts and counterbore the back side about.02” deep where the heads are on the back of the board.
Other than that, it looks good.
