There are three different ways to measure the length of a bandsaw blade. Stand the blade hoop up on the strip of tape, and use a pen to mark a line on the inside of the blade and onto the tape. Roll the blade in a straight line for one rotation – until the mark on the inside of the blade hits the floor.
In order to determine bandsaw blade length for your saw, please reference our Bandsaw Blade Lengths & Manufacturers page for a list of common saws and sizes. If you cannot find your saw model or are unable to locate a manual, Detroit Band Saw can teach you how to determine bandsaw blade length. If you do not have an existing blade, there is a mathematical equation to help determine saw blade length in inches.
“We don’t know what bandsaw blade length fits your bandsaw either, but fortunately it’s easy to find out. It’s especially easy, of course, if you have an old bandsaw blade that fits the saw-just measure its length. Make a mark on the inside of the blade, and align it with the zero point on a measuring tape laid on the floor. Roll the blade along the tape until the mark reaches bottom center again, and there’s your measurement. The exact measurement is just a target, by the way – if your bandsaw blade measures 114-5/8″, you don’t have to special-order that exact length. If you don’t have a blade to measure, or if you simply want to know if a 93″ blade will fit a saw rated to handle 92”, here’s how to determine the range of lengths you can expect to mount on your saw. Bandsaw Blade length listed in owner’s manuals is usually the average of these two figures, or a convenient whole number somewhere in the vicinity.
If you want a good blade for the task, check out the Olson Saw Hook Saw blade works well thanks to its easy to use and durable nature. You know how to calculate your band saw’s blade length, so we’ll look at how to get the width and depth measurements. Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure.
Band saw blades come in a variety of lengths, widths, thicknesses, and tooth configurations. In order to determine bandsaw blade length for your saw, please reference our Band saw Blade Wizard on any of the blade pages on sawblade.com. If your saw or model are not in the wizard, This video will teach you how to determine bandsaw blade length.
measuring bandsaw blade length Related Question:
How long is a 14 inch bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How long is a 12 inch bandsaw blade?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw.
How are saw blades measured?
Though saw blade diameters are measured from the tops of the blade’s teeth, their reach is limited to the gullet. Depending on the type of saw blade and the number of teeth, the gullet will vary in depth quite a bit.
How long is a 10 inch band saw blade?
POWERTEC Band Saw Blade – 63.5 ” x 1/4 ” x 14TPI for Craftsman 10 ” Band Saw 21460 and 21461.
How long is an 18 bandsaw blade?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What size blade does a 14 inch Craftsman band saw take?
99-3/4 inch Band saw Blades to fit 14 inch Sears Craftsman Bandsaw 922401.
What size blade does a 9 band saw use?
For cutting irregular shapes and ripping lumber into thinner pieces, novice woodworkers will find the new 3386 SKIL 9-inch Band Saw with Light is essential for their workshop. You’ll cut through a variety of wood materials with the 6-TPI blade.
How do I know what size blade I need for my circular saw?
Blade capacity determines the maximum depth of cut a saw can achieve. The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Can I use a 4 inch blade on a circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What is a raker tooth bandsaw blade?
A raker blade has an odd-numbered tooth sequence with a uniform set angle. A basic, three-tooth sequence is left, right, and straight, or unset. The straight tooth is the raker tooth.
Can I use a longer bandsaw blade?
Try a blade of 114” or 115” length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2” difference between the shortest and longest blades that the saw can use.
How is bandsaw measured?
Bandsaws are measured by the size of the wheels with the exception of three and four wheel bandsaws which are measured by the distance from the blade to the neck as they can have any size wheels. As for three wheeled saws never under any circumstances get a saw with wheels of less than 12″.
What does a 14 inch bandsaw mean?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What size blade does a Ryobi 9 inch band saw take?
Sliding Miter Gauge. Includes 9 In. Band saw comes with 1/4 In. X 6T Blade, and Miter Gauge.