This electric plaster saw is used for the removal of plaster bandage after fixed reduction, and it is suitable for all types of plaster bandage. Als. Turning the transmission into sixth gear can be used to cut fiberglass ( but not recommended to cut glass fiber, the motor may have issues in the long run due to dust.
THE CLASSIFICATION OF PRODUCTS . 1.Anti-shock type, degree of protection against harmful into the liquid level points, and protection against harmful into the liquid level points: medical saw is II type. B is a common type of tyoe. 2.Divided according to the work of the system: the medical electric plaster saw is running low on batteries.
SAFE AND RESPONSIBLE —. When in use, the electrically operated gypsum saws through the saw blade swinging sawing gypsum, even if the saw blade comes into contact with the patient’s skin, there will be no cuts caused by this. Operators and patients are guaranteed to be safe because the electrical machinery is protected by a double-insulation device that is installed on it.
OUTSTANDING QUALITY . Using an FDA-approved micro imported motor with low noise and vibration, this plaster saw is more powerful and reliable, and it operates at a faster speed without overheating. Alloy blades are suitable for long-term operation. A foam-padded travel case is included, and the item is sturdy and well-constructed.
SPEED ADJUSTABLE — Speed can be adjusted from large to small, in the actual test 1-5 gear, the closer it is to the skin, the slower it should be, and the lower the gear the faster it should be.
Three-bladed medical electric plaster cutting saw with a motor.
The most important technical information is as follows.
– Voltage: alternating current 110V/60H.
– Power Consumption: 125.
– Non-load frequency: greater than 12500 revolutions per minut.
In the absence of a load, the speed is 75d.
– Motor Winding Insulation Classification: E Classificatio.
Application and Paying Close Attention.
1. Prior to use, check whether the saw blade has formed properly, whether there are any missing teeth, whether the blade shaft has been fixed, whether the saw blade has been embedded with the pull head axis position of the flat side, whether the other nuts in front of the saw blade wrench have been removed, whether the saw blade has been exit concave sleeve and saw blade, whether the saw blade and then put the other tightly, check whether the motor ventilation road has been cleared to prevent foreign objects from clogging.
2. When in use, do not apply excessive pressure to the blade; if the blade becomes stuck in the plaster bandage, turn off the power and slowly withdraw; do not open the blade when the power is turned off, as this can cause damage to the motor.
3. Temperature rises in the motor housing as a result of the use of the motor over time, such as hot case temperature, which should be found to be suspended, allowed to cool before use, or likely to cause motor overheating and burnin.
4. If you hear an abnormal sound or notice excessive vibration, please schedule maintenance as soon as possible.
The plaster saw should be cleaned after use and stored in a dry environment (relative humidity less than 80%, non-corrosive gas environment) to avoid water damage and stumbling upon it.
The following items are included in the package.
1 x Electric Plaster Saw for Medical Purpose.
Circular Saw Blades (Set of 2.
1 x Saw Blade in the shape of a fa.
1 x Wrench (optional.
1 x Transport Bo.
1 x Instruction Manua.
Purchased for the purpose of opening a medical practice. Because the name brand saws are more than $1400, I was looking for a more affordable alternative. It’s been bothering me for a few months. So far, this saw has proven to be effective in removing casts. I’m not sure how long it will last, though. Time will tell whether or not this is true. Because it has a shorter cord, you may need to purchase an extension cord, which is exactly what I had to do.
