With two 18V 6.0Ah batteries, you can use this hammer drill.
With 1,205 in/Lbs of turning torque and up to 2,100 RPM with a 0-31,500 BPM, this machine delivers professional-grade performance.
TORQUE SETTINGS: The 22-stage + 2-clutch configuration provides 22 torque settings, as well as a drill mode and a hammer drill mode, to ensure that the torque is properly matched to the application.
1 1/2 inch single sleeve ratcheting CHUCK “A keyless, all-metal chuck with carbide insets for quick and simple bit replacements as well as strong holding power is included.
LIGHTWEIGHT: At only 3.5 lbs (without battery), it is less tiring to use for extended periods of time or at high altitudes.
LED LIGHT: The built-in LED light provides effective illumination for dark work areas.
Trigger: Optical trigger switch for more responsive variable speed actuation, as well as a trigger that is more resistant to wear. Metabo HPT DV18DBL2 is the assembly style used.
The DV18DBL2 hammer drill is equipped with Metabo HPT Brushless motor technology, which maximizes the amount of power delivered to the motor by reducing unnecessary energy loss through friction and heat.
It is the most suitable hammer drill for drilling into concrete, boring large holes into wood, and driving lag bolts, among other things.
The 22+2 clutch settings enable the user to adapt to low torque applications such as hardware installation and furniture assembly.
Brushless tools have a longer run time between charges, more power, and longer durability because they are controlled by a microprocessor chip that efficiently delivers current flow to the motor.
Because there is little to no maintenance. The Reactive force control (RFC) system built into the tool reduces the risk of injury to the user as a result of tool overload, while also protecting the battery and motor from damage.
Its ergonomic design for the tool body, which is a trademark of Metabo HPT, makes it extremely well-balanced and comfortable to use for extended periods of time.
Metabo HPT lifetime lithium-ion tool warranty is included. To begin with, I was tempted to deduct a star because of the cost of the tool. Three hundred ninety dollars is a lot to swallow, but the drill is THAT good.
I have a large number of Hitachi tools that I use in my professional capacity in an industrial setting, and overall, with the exception of my Dv18dbl, I have been pleased with their performance (the previous model of this drill). No, it wasn’t a poor drill; it was simply lacking in terms of power, battery capacity, and features that are found in other drills on the market today. After discovering this new model and its specifications, I couldn’t help but notice that Hitachi had taken an objective look at the old model and made genuine improvements as a result of their efforts. Here are some of the highlights.
The ergonomics of this drill are excellent, as are the ergonomics of all of my other Hitachi tools. It’s definitely heavy, but in a solid, reassuring way that tells you that you’re looking at a high-quality piece. This model’s side handle is massive and threads securely into the aluminum gearbox housing, as opposed to the previous model’s cheap-feeling plastic side handle. Another improvement is the clutch ring, which is more comfortable to grip and read the settings on.
Power: The torque produced by this drill is almost unbelievable. When it comes to drilling steel and concrete, it has all of the power I could ever ask for. The reactive force control is unquestionably effective and does not interfere with performance. Hitachi did a fantastic job with the electronics on this one, which is evident in the speed compensation under load as well as the trigger response and the trigger response time.
Chuck. It appears that Hitachi is paying attention once more. The Jacobs chuck that was present on the previous model is no longer available. Despite the fact that the Jacobs was made entirely of metal with carbide inserts, it proved to be a frustrating chuck that lacked the clamping power you’d expect. In its place on the new model is a top-of-the-line ROHM chuck, which is manufactured in Germany and ratchets smoothly while gripping like glue.
Batteries: Two 6.0ah batteries, which are the same physical size as the old 3.0ah batteries, are included in the package.
Charger: The new rapid charger that comes with the package is another significant improvement. This device comes with a built-in USB port that is convenient (though it is almost yawn-inducing in this day and age), but the most impressive feature is its ability to recharge a 6.0ah battery in only 38 minutes. It’s encouraging to see a manufacturer make such a significant improvement in charge time, especially since battery capacities have been outpacing charging technology in recent years.
Case: There’s nothing particularly noteworthy about this case; it’s just your standard Hitachi case. That the stackable/modular storage cases that Hitachi implemented in Europe have not made their way to the United States is a disappointment.
The bottom line is that this is the most dangerous 1/2 of the game “On the market, you should drill. With Hitachi, the company has gone from having a lukewarm midpack entry to offering something that will force competing tool manufacturers to raise their own game.
