At 200 PSI, this compressor has 25% more PSI than a simple pancake compressor.
In this case, a single compressor can be used to run several large body nailers at the same time. The 4 CFM at 90 PSI allows for this.
There are many different types of nailers that can be used at the same time. They can be used for framing nails or for roofing nails or for siding nails or for finish nails or for brad nails.
PRODUCTIVITY: Drives nails flush every time with no delay.
At just 41 pounds, it is 22 percent lighter than a traditional twin-stack compressor, which weighs about the same.
The 6-gallon tank has enough air to run a crew.
A handle made of metal can withstand even the roughest conditions on the job site.
Because of THE TANK, Metabo HPT is changing the job site compressor. With a class-leading PSI and a weight of just 41 pounds, this lightweight compressor packs more pressure into a smaller package than any other in its class. Designed to run framing, roofing, or siding crews at the same time. It can run five 18Ga nail guns at the same time. The TANK is for serious professionals who need a high-performance compressor that doesn’t let them down when they drive nails flush. The tank has enough space and PSI to run two framing nailers, two siding nailers, or two roofing nailers at the same time. A traditional jobsite compressor would not be able to do this. Three 15Ga or 16Ga finish nailers, for example, can be used to finish the job. Five 18Ga brad nailers can also be used. When you use 200 PSI and 4 CFM at 90 PSI, you can do more work with less weight. The Tank is strong and powerful enough to get the job done. It is better than the model EC710S. It’s better than the model EC99S.
It was stolen from my old compressor, which had been used for 17 years, so I bought this one instead. During the 10 minute break in period I put white paper under the drain to tell if any metal or dirt was in the tank, there was none. I took the plastic cover off because I had never used an oil-less compressor before and wanted to see how well it was made. I also wanted to see how well it worked. China says that this thing was made there. All the parts were made in Japan, so that means that this thing was built in China. This is how it looked when it was built: The air fittings are high-quality and the whole thing was built well. It can handle all of my air tools with ease (30 second recovery time). I ran the unit until it shut off and let it sit for three days. It didn’t lose a single pound of pressure. Think I got what I paid for!
