Buy Milwaukee 2553-21C M12 FUEL 12V Li-Ion Brushless Cordless 1/4-inch Hex Impact Driver Kit 1300 in-lb w/CP Battery & Charger

For faster driving speeds, the POWERSTATE brushless motor provides 1300 inch/lbs of fastening torque.

In the event of an overload or overheating, the REDLINK plus intelligence prevents damage to the tool and its battery.

The 4-mode drive control gives you more control over the output speed and power than you ever had before.

With a length of only 5.1 inches, it provides unparalleled access in confined spaces.

It comes with one M12 FUEL 1/4-inch hex impact driver, one compact battery, one M12 lithium-ion charger, one carrying case, and one removable belt clip (all sold separately).

Once again, the M12 FUEL 1/4-inch Hex Impact Driver raises the bar for 12V performance by providing the fastest driving speed, most power, and smallest size in its class. By concentrating on productivity, this Impact Driver completes tasks more quickly than its competitors, with application speeds that are over 20% faster. This tool produces more than 1,300 inch/lbs of torque, which allows the user to complete a wider range of fastening tasks in less time and with less effort. Because it is only 5.1 inches in length, it provides unrivaled access in small spaces. The POWERSTATE Brushless Motor has a speed range of 0 to 3,300 RPM and a constant power output, allowing it to drive screws at a faster rate. The REDLINK PLUS Intelligence system is the most advanced electronic system available on the market, and it protects the tool and battery from damage caused by overloading or excessive heat. M12 REDLITHIUM Compact Batteries or Extended Capacity Batteries are recommended for use with this product because they provide greater output per charge and greater output over the life of the battery pack than competitive batteries on the market.

Be on the lookout, the item has been delivered. No lights come on when I plug my phone into the charger. I went to three different establishments. There are no lights. No lights were visible when I checked the continuity of the inline power supply, which was 120V. I took the charger apart to see if there was anything obvious inside. After being completely rebuilt, the board was sold as new. When it comes to electrical insulation on a board, MFG does not use as much silicone base as is required by law. (I work in the HVAC and electrical fields on a regular basis.) I will update my review once this has been corrected. Used merchandise that has been repackaged and sold as new.

Leave a Reply

Your email address will not be published. Required fields are marked *