Up to 250 ft./lbs. of torque can be generated by the POWERSTATE brushless motor.
Tri-LEDs provide high-definition lighting that makes it easier to see your work space with less shadows.
Keeps you from overtightening and increases your productivity by applying no more than 20 ft./lbs. of torque to the screws.
Remove mode gives you more control after a bolt breaks free, because the RPMs drop dramatically when the bolt is loosened.
In terms of size, the Milwaukee M18 FUEL 1/2 in. Compact Impact Wrench with Friction Ring is the smallest in its class. It gives users the most access in tight places, up to 250 ft./lbs. of nut-busting torque, and the best view of their work area. This battery-powered impact wrench is only 4.9 in. long and has a POWERSTATE Brushless motor that gives it the power to remove hard-to-reach screws even in small spaces. Tri-LEDs surround the anvil of the Milwaukee 1/2 in. impact wrench to give users more light and less shadow. The 4-Mode DRIVE CONTROL lets you choose from a range of pre-set RPM and IPM levels that can be chosen from a single button on the tool. It doesn’t apply more than 20 ft./lbs. of torque to hand tightening applications in Mode 4 to avoid overtightening the screws. Mode 4 also has a feature called Bolt Removal Control. It gives full torque, then slows down the RPMs when the bolt is removed to keep the fastener from falling off. This is RedLink PLUS. Intelligence electronics make these controls possible while protecting the tool from overloads, overheating, and over-discharge. They also make sure the tool performs at its best.
This is the tool you should use to change or rotate your tires, for sure. For standard car and truck lug nuts, this is a good fit. It won’t be strong enough to break off lugs from boat trailers or heavy machinery with this hammer. You will need the bigger version before you can use this tool. This should help.
