Access to this page has been denied because we believe you are using automation tools to browse the website. Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
There are certain situations where only partial refunds are granted Any item that is returned more than 30 days after delivery. The customer is responsible for return freight and will not be refunded original outgoing freight charges unless item is defective or damaged during original outgoing shipment. We will have the carrier return the shipment back to our warehouse, and refund will be processed for your purchase.
angle grinder cutting wheel direction Related Question:
Which direction does an angle grinder rotate?
Angle grinder rotates in opposite direction as thread pitch. It is general rule for all nut clamped tooling.
What is the right position of angle grinder?
For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface. Position the blade guard at the back towards your body. Use a smooth back and forth motion to guide the flap disc over the material.
Can I use angle grinder to cut wood?
There are several reasons why some users attach a circular saw blade to an angle grinder. The blade of an angle grinder is a grindstone that is used to polish or sharpen metal and stone; it cannot be used for cut- ting wood because it may burn and singe the wood by friction.
When the portable disc grinder is laid down it should be position?
When laying the portable disc grinder down, always position it on the tool rest. 7. Before using the switch lock on the portable disc grinder always check to make sure the lock is functioning properly.
Can you put a cutting wheel on a grinder?
NEVER attach a Type 1 straight or cut-off wheel to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.
Why I shouldn’t use a cutting wheel to grind with?
Cutting-off wheels are thin by design and do not have adequate lateral strength for side grinding. The fiberglass reinforcement is in the wheel to add strength. Using the side of the wheel can damage the fiberglass. This reduces the strength of the wheel and can lead to breakage.
What is the arbor on a grinding wheel?
Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders. Arbors are also known as mandrels. For technical drawings and 3-D models, click on a part number.
What is the arbor on an angle grinder?
Adapting the spindle from a small “foreign” size to the American size, so we can have a wider choice of abrasives. “The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
Why do bench grinders have 2 wheels?
Bench grinders come with two wheels that can be used for multiple purposes. The first wheel is usually designed for fine sharpening and precision work, while the other wheel is used for rough shaping. These can be easily swapped out for different wheel configurations according to the user’s needs.
What is the difference between an angle grinder and a cut off tool?
A cut off tool can only be used for cutting, whereas an angle grinder provides you with cutting, shaping, sharpening, grinding, and other functions. A cut off tool can be easily operated with one hand, while the angle grinder requires both hands.
