For the last 5 years, I have used the Dewalt DW328 portabands with much satisfaction. Rubber Bumpers – I don’t even want to think of how many Milwaukee saw “Ends” I have replaced over the last 20 years when the saw get dropped. I have had mine for a couple of years now and no more Milwaukee sawzalls for me.
The Milwaukee 2429-21 XC compact bandsaw allows for blades up to 32″ to be used, and the DeWalt DCS317B can take a blade with the sizing of 27 ½”. Blades can break and bend, which is why it’s a beneficial idea to look into compact bandsaws that have a blade tracking adjustment feature – which will monitor the general wear and tear of your blades, saving you an expensive replacement in the future. Adjustable blade tension, as well as blade tracking to monitor blade performance and durability.
My company uses mainly Milwaukee and I tend to prefer their products for most things over Dewalt but I feel Dewalt definitely has better products in some areas. I have Milwaukee battery tools but with corded tools that doesn’t matter, no particular brand loyalty. Not sure about this particular tool but a lot of Dewalt tools are “Built in USA” which isn’t made in USA, but is hopefully closer to it than Milwaukee power tools, which are AFAIK all made in China.
I found the Lenox bi metal blades to be the best there is, even better than the Milwaukee brand. “The worst thing about it was it came with a shitty sheet metal one sided work support. It only allowed you to cut from one direction on your stock with full support, and would bend with rough treatment. I made a new one from some 1/4 x 2” band iron, that provides robust support on both sides of the blade, as well as supports the saw while cutting freehand on the bench or floor. Be sure to get some blade stock when you purchase the unit, get a few different blade pitches.
1 Portaband- Milwaukee vs. Dewalt I’m stuck on the fence trying to decide between Milwaukee 6232 and Dewalt DWM120. 2 Re: Portaband- Milwaukee vs. Dewalt My first Milwaukee is before they even had the deep throat model. 4 Re: Portaband- Milwaukee vs. Dewalt I own that Milwaukee and have had several of the older models.
Integrated hang hook of the portable band saw allows user to hang the saw without damaging the front….LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting of DEWALT….Tool less blade changing lever loosens blade tension. DEWALT 20V MAX* Portable Band Saw, Tool Only… 2-1/2-inch cut capacity of the metal band saw cuts up to 2-inch SCH 40 pipe. Finding the ideal band saw for your cutting project can be a great ordeal, but don’t worry as all the information you need to pick the right band saw is just a paragraph away.
Read on to find out how two of the best compare with our review of the Milwaukee M12 Vs. Dewalt DCS371B.Milwaukee 2429-21xc M12 12 Volt Deep Cut Cordless Portable Band Saw Kit: Top Features. Handle Position: A centered handle position means having stability and balance when holding the Dewalt bandsaw and the handles ergonomic design cuts down on user fatigue as continuously holding the device is comfortable and offers excelled flexibility. In a showdown between the Milwaukee 2429-21xc VS Dewalt DCS371B Cordless Bandsaw there is a lot to consider, as each has a few similarities.
milwaukee band saw vs dewalt Related Question:
Will Milwaukee band saw blades fit Dewalt?
Blade. If you’ve used any type of power tool, you’ll be well aware of the importance of the blade, and keeping it maintained properly. The Milwaukee 2429-21 XC compact bandsaw allows for blades up to 32” to be used, and the DeWalt DCS317B can take a blade with the sizing of 27 ½”.
What size blade does Dewalt bandsaw use?
Length, 0.02 in Width (3-Pack)
Are band saw blades interchangeable?
For cutoff work, band saw blades should be as thick as the saw and material will allow. TPI stands for “teeth per inch” when talking about band saw blades. “Pitch” is interchangeable with TPI when talking about band saw blades.
What is the most common bandsaw blade length?
Try a blade of 114″ or 115″ length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2″ difference between the shortest and longest blades that the saw can use.
What size blade does a DCS371 take?
DEWALT Cordless, Portable Band Saw, 20V DC, 32 7/8 in Blade Length – 25DU76|DCS371P1 – Grainger.
Which is the best hobby bandsaw?
Our top choice of band saw, the JET JWBS-14DXPRO (view at Tool Nut), is powerful, versatile, and durable enough even for a professional, but is also well suited to the workshop of an avid DIY woodworker or hobbyist.
What is a band saw good for?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
How long does a portable band saw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What size blade does a Dewalt DCS374 take?
Answer: The DCS374 portable band saw is designed to use . 020″ (0.5 mm) thick, 1/2″ (12.5 mm) wide and 44-7/8″ (1140 mm) long blades.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
What size blade does a Dewalt 20 volt bandsaw take?
What’s in the box. DCS371 20V MAX band saw, 14/18 TPI blade, blade tracking wrench, battery and charger sold separately.