Buy Milwaukee M12 12-Volt Cordless PVC Shear (2470-20) Milwaukee M12 12-Volt Cordless PVC Shear (Power Tool Only - Battery, Charger and Accessories Sold Separately)

Allows for cuts up to 2-inch Schedule 80 PVC.

Repetitive cuts become more efficient because the blade comes back quickly.

Impact, water, and rust-proof: Stainless Steel Blade and Aluminum Jaw.

PVC, CPVC, PEX Tubing, BlazeMaster, ABS, Non-Metal Conduit, and Rubber Hose can be cut without leaving a burr.

There is no battery, charger, or other accessories with this power tool.

A powerful mechanism can cut up to two inches of schedule 40 PVC in three seconds, making it easy to cut. With a Pierce Point, the blade is very sharp and doesn’t need to be cleaned.

Cuts PVC and PEX with an offset blade. This blade can be used to cut PVC and PEX that is in the wall, ground, or close to the wall. Quick Return Blade – Increased productivity when cutting the same thing over and over. Over 200 cuts can be made on a single charge with this drive. It’s made of all metal.

An overview of what this item is abou.

Cordless PVC Shear, Bare Tool, Voltage 12.0, Cutting Capacity OD 2-3/8 In., 5 No Load RPM, Uses Copper, Plastic, Rubber, Vinyl Tubing and Hose, and it can cut PVC. No, there is not a battery in the package. Tool length is 14-1/2 inches. It has a Stainless Steel blade, quick blade return, easy blade change, 3 second cut time, and battery fuel gauge. It comes with the tool, but not the blade.

With the new 2470-20 M12 Cordless PVC Shear from Makita, you can cut through two inches of PVC in less than three seconds. It also has an offset blade so you can cut PVC that’s mounted to studs or near a wall. When it’s powered by a battery made by MILWAUKEE, the new PVC Shear can cut more than 200 times on a single charge. This is only a tool. Includes. Shears made of PVC are 2470-20 M1.

This is a good idea for cutting PVC pipe. In order to cut 1.5 and 2 inch schedule 40 PVC pipe, a small amount of the plastic is bent when the cutter is used because of how the plastic is cut. This makes it very hard to glue the cut end of the pipe to the pipe fitting. Oddly, I think that the product works as it should. They must not have cut pipe and then glued it to a fitting before. Seller: I’ll have to pay for shipping and a 20% fee to return the item. No, they aren’t going to restock a product that doesn’t work right. Also, the product weighs about 20 pounds when it is shipped. Keep an eye on what you buy on Amazon, because you’re not only dealing with the site itself, but also “nameless” sellers who don’t want you to return a product that doesn’t work right.

Leave a Reply

Your email address will not be published. Required fields are marked *