When most people think about cutting laminate flooring I bet they think of using a miter saw and maybe a jigsaw for some of the specialty cuts but what they don’t realize is that there are many different tools that will cut laminate flooring. A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. You simply use leverage to cut the pieces, putting force down on the blade to cut the flooring.
There are several types of saws that you can use to work on laminate flooring. The best saw for laminate flooring would depend on your personal preference and what you are looking to do with it! All of these saws in our guide can cut through a variety of materials while still being versatile in their abilities. Take a look at our recommended saws and read about their benefits to see which saw may be best for you!
You can make straight cuts with a circular saw, a table saw or a chop saw. When cutting with a circular saw, this means turning the board over and cutting from the back. When cutting with a table saw or chop saw the board should be face-up.
mini circular saw for cutting laminate flooring Related Question:
Can I cut laminate flooring with a circular saw?
A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
What type of saw is best for cutting laminate flooring?
A jigsaw is a real all-rounder when it comes to cutting laminate floors. It’s best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.
What is the best circular saw blade to cut laminate?
What blade should I use to cut laminate countertop? If you use a circular saw, it’s best to use a fine-toothed narrow blade with at least 40 teeth. When it comes to cutting laminate countertop, blades with carbide tips usually last longer than regular steel.
How thick can a mini circular saw cut?
A compact circular saw designed for a 7.25-inch blade can cut to a maximum depth of 2.5 inches.
Can you use a circular saw to cut vinyl plank flooring?
Circular saws can and often are used to cut vinyl plank flooring, and if you have this type of saw in your garage or woodshop, it can be used very successfully to cut this material.
Do I need a special blade to cut laminate flooring?
Whether you’re removing an old laminate floor or installing new laminate flooring, having the appropriate saw blade is necessary for clean cuts and to prevent chipping.
Can I use a hand saw to cut laminate flooring?
You can perfectly well saw your laminate floorboards with a regular hand saw. First make a short incision and then continue to saw. Put the saw line as close as possible to the bearing surface and clamp the loose piece down. Cut with the decorative side of the panel up to avoid damaging the decor.
Does laminate flooring dull saw blades?
You see, laminate flooring will destroy a wood cutting blade with alternating top bevel (ATB) teeth in no time at all. The sharp points on this type of blade can’t handle anything that hard – they dull quickly and those tips are what the blade uses to cut cleanly through wood.
How do you cut laminate flooring with a utility knife?
After marking the board on the laminate on the plank, you can use the utility knife to score a line directly across the plank. It is best if you use a straight edge for this purpose and you can even slightly move the straight edge about 1/16 of an inch to make the cut a little wider.
Can a mini circular saw cut a 2X4?
The new WORXSAW new Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in. circular saw.
How deep can a 5.5 circular saw cut?
It turns out that it’s a simple question but very essential when you are going to do a project using this kind of saw. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
Do I need a mini circular saw?
The answer is simple: no. A normal circle saw has higher cutting depth, power, and can perform all of the tasks that a small circular saw can. But compact circular saws are a good compromise, providing power, convenience, and comfort. Why set up the full-size saw when you only have a few woodworking jobs to complete?
Do you cut laminate flooring face up or down?
If you use a jigsaw blade with downward oriented teeth, you should place the boards with the face up. In this manner the saw won’t chip the edges and you will get proper cuts. If you have a blade with upward oriented teeth, you should place the laminate planks with the top-face down.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. Insert the second plank into the first at an angle pressing the short ends together; then press it down.
Will a Stanley knife cut laminate?
Yes. You can cut laminate wood flooring with a utility knife.
