Specially made for people who like to do things at home, this tool is small and lightweight, but has a lot of power.
The motor has a lot of torque and can rotate at up to 8000RPM, which means it has a lot of cutting power and doesn’t make much noise. You can use it at home.
Protective glass with a super convective cooling hole and a full heat shrinkable tube that covers the welding line.
With 7 levels of power adapter, you can easily change the speed of the machine to meet different cutting speeds.
The drill chuck is made of pure steel and has a high-quality aluminum alloy base.
Feature.
This means that the machine has high precision, is stable, and doesn’t make a lot of noise.
If you like to do things at home, this is the tool for you. It’s small and easy to move around, and it has a lot of power.
– A motor with a lot of torque.
– All small square or cylindrical woods, like Pterocarpus santalinus, Dalbergia odorifera, and Thuja sutchuenensis, are good for this.
Specification.
Power:200.
The maximum processing length is 140mm.
The maximum processing width is 50mm.
Aluminum alloy is the material.
The maximum processing thickness is 50 mm.
The product is 310*60*65mm.
Work is done by hand.
Voltage:DC12-24.
Adapter.
Input: 110V-24V AC at 50/60Hz. It can reach 1.3A.
Output:12/15/16/18/19. 4.5A Max for 20/24. Ma.
Adapter: 113*53*35mm in length.
A package comes with.
It has one adapter.
A machin.
One 50mm Diamond Blad.
Cutting Piece: 50mm HS.
There is only one polishing wheel in this set.
5 sheets of sand pape.
There is one caliper.
One rod for grinding, one for cutting.
Drilling three times.
A cable is one of the thing.
A set of 6 carving blade.
One diamond blade connects to another diamond blade with a piece of metal that looks like meta.
One high speed steel blade connects to the other with a joint.
There is only one drill chuck wrench.
One Allen wrenc.
Fixed needle: 1.5/2.0/2.5M.
One thread-fixed needle.
For the money, it’s a good thing to have, but there are some problems with it. You can buy one on Amazon for $30 to $70, but there are some problems with it.
#1, the “bed” on mine was bent. So far, I think I can make it work. The center of the board is still flat, but one rail on the end is bent.
2. The tail piece doesn’t line up with the drill chuck.
It doesn’t look like you can change the chuck, but it’s cheap. Not a very good chuck at all.
But the kit comes with some sanding disks, cut-off wheels, and other things, so you can use them. That’s why in the end, I’m going to keep the thing I bought. It does what I bought it for. But it isn’t the most accurate thing in the world at the same time. We’ll have to wait and see how long it lasts.
