We use high-quality imported triangle cutter heads to build our pneumatic chamfering machines, which are sturdy and durable while also operating in a stable manner. The machines are also waterproof and dustproof. Our pneumatic angle grinder can work continuously without overheating, and it maintains accuracy assembly while providing stable performance over a long period of time.
[Ergonomic Design]-Our chamfering tool is entitled to high performance in accordance with strict rules, and such a pneumatic chamfering tool is made via accuracy craft by a large number of professionals.
With an elbow design, this lightweight hand tool allows for simple operation and increases work efficiency significantly.
[Applications]-Our chamfer air tool can be used in a variety of applications including straight edge, curve, inner hole chamfer, outer round chamfer, arc R angle: R1.5, and arc R angle: R1.5.
[Adjustment Chamfer Speed]-Air intake adjustment switch, five-speed air intake adjustment, the air intake size can be adjusted at will. [Adjustment Chamfer Speed]-The air intake size can be adjusted at will.
Modifications to the chamfer size are made by unscrewing the screw, rotating the screw to select the scale size, and tightening the screw.
This product has an adjustment range of 0.1-1.5mm, and the measured maximum can be poured up to C1.5mm.
[Security and Convenience]-Our mini chamfering tool is equipped with a safety pressure plate switch, a metal safety switch with a safety buckle, and a safety buckle, making it even safer to use.
Alternatively, if the 1/4 Inch Air Inlet is not compatible with your air compressor, please use the additional US Air Plug.
Specification.
Color:Green/Silve.
Angle of Chamfer: 45 degree.
Chamfering Capabilities: 0-1.5 millimeter.
Depth can be adjusted between 0.1 and 0.9mm.
The working pressure is 0.6MPA.
Maximum Rotational Speed: 30000 RP.
Air consumption is 0.4 m3 per minute.
Aperture of the Chamfer: >8m.
Thickness of the Chamfer Plate: greater than 3m.
Counterbore Hole Depth: greater than 5m.
Included in the package.
1 piece of Chamfering Equipmen.
1 x US Air Adapte.
1 x Chart of Analysi.
Cutters with a triangular shape are available in two sizes (Already Installed in the machine.
2 x Wrench (optional.
For a short period of time, everything worked perfectly, but then the bearing on the nose failed. Although the parts diagram indicates that it is a 683zz bearing, it is clearly not; the tip measures 4mm rather than 3mm. Is it possible that it’s a 684zz.
It’s a lot of rotations per minute for such a small bearing, and when it fails, it chews up the workpiece.
