This product is only for use with ALC USA blasters.
It comes with one 3/32in. and two 1/8in. nozzles, as well as three sealing blocks.
Other nozzles must be ordered separately.
There’s no need for hose adapters anymore. When the lever is released or the handle is dropped, the valve shuts off the flow of abrasive. U.S.A. Valve/valve kit is the type of product. Inches of Nozzle Size (in.): 3/32 and 1/.
Although it appeared to be tougher than the competition, it was not of higher quality. The pivot is at an angle, causing the tip to be off center, and the tip was too far out, resulting in a poor seal. A second rubber washer was placed under the nozzle to help move the nozzle forward. This, along with a 3/16 nozzle, was added to a Harbor Freight 110lb tank in the hopes of using black diamond media, but the media was still too heavy and coarse for the setup.
