20 gallons of storage spac.
It has a capacity of approximately 110 lbs. of abrasives.
Time required for blasting: 30-50 minute.
A Sturdy Structur.
Handle for moving convenienc.
This Allsource Pressure Abrasive Blaster is ideal for a variety of applications, including cars, trucks, machinery, steel, brick, glass etching, and much more besides. The unit is easy to move around thanks to the sturdy wheels and handle. In addition, the long hose will allow you to get to where you need to go. The ability to swap out nozzles gives you complete control over the blasting media. Blasting media is available for purchase separately. For use with coarse abrasives, a 3/16in. nozzle kit (Item# 1556550) is available for purchase. 6 to 25 cubic feet per minute of air consumption at full loa. the following nozzle sizes (inches): 3/32, 7/64, 1/8, 9/64. Steel is used for the body of the Deadman. Yes, there is a safety valve. Hose dimensions (inches x feet): 3/8 x 8. Powder-coating is used for the body finish. Capacity (cu. ft.) of the media: 1.2. Recommended media: Black Beauty, steel grit, glass bead, and other natural materials. Dimensions (inches): L x W x H: 27 x 2. half-inch by fifteen-and-a-half-inch by thirty-seven-and-a-half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inch half-inc. 1/2. Tire Dimensions (in. ): 6. Operating PSI ranges from 65 to 110. Yes, a gun is included. Separator for moisture. Yes, my friend tested the machine today and found it to be inoperable; no chorro de arena is produced when only air is used.
