Having this drillers dust bowl on hand at your work site can help you keep messes to a minimum. The bowl can be used to collect sawdust and other debris while drilling large holes.
Make sure you don’t have to vacuum or wear face masks and goggles when you use this driller’s dust bowl to clean up sawdust when installing recessed lighting.
POWER TOOLS: This driller’s dust bowl from Morris Products is compatible with the power tools you already own. It works with all sizes of hole saws, drill bits, and other cutting tools, as well as all types of drills.
It’s easy to attach this saw dust collector to the drill’s chuck. It fits perfectly between cutting tools and the drill’s chuck. The driller’s dust bowl makes a seal on the surface of the material and lets you get rid of all the dirt.
Use this drillers’ dust bowl and you won’t have to worry about damaging ceilings or walls when you use it. The bowl collapses like a plunger when it’s sealed to the surface. Because it doesn’t leave marks on the ceiling.
A product made by Morris. Drillers caused the Dust Bowl. When you have this Morris Products Drillers Dust Bowl, you can keep the dust and debris from making a mess when you install recessed lighting. This saw dust collector fits on any type of wall and folds down to make a tight seal to keep dust from getting into the ceiling when you drill. It doesn’t leave any marks on the ceiling. If you work with electricity, you’ll need this drillers dust bowl. It works with most power tools and fits easily between the drill chuck and cutting tools. Clean up time will be cut down by using drill bits, cutting tools, and all sizes of hole saws. This driller’s dust bowl is 12 x 5 x 12 inches, which makes it easy to move to and from commercial, residential, and industrial jobs. There are meters and testers, organizational devices, power connectors, and tools made by Morris Products that are high quality. Morris Products was founded in 1994 and is based in Queensboro, New York. Features. It doesn’t need to be vacuumed or covered with a face mask, and it doesn’t need glasses. – Drill Bits, Cutting Tools, and Hole Saws all work. – There are no ceiling marks. Between the drill’s chuck and the cutting tool, it fits. Packages come with. One of the Drillers from the Dust Bowl. To get yours, scroll up and click “ADD TO CART..
It works great. In the past, we had recessed lights installed in the plaster ceiling of our dining room. When we hired an electrician to do nine new cans in our living room and hallway, we were ready for plaster dust to fly all over when he did the work.
I gave the electrician the Morris bowl and asked him to try it out, and then I told him to keep it. I took a few ideas from an electrician’s blog and used them. firmly press the entire circumference of it against the ceiling; hold it there for 30 seconds to let the dust settle in the bow; clean out the bowl with a vacuum and damp rag after each hole with the vacuum.
Because the hole was drilled, there was very little dust that came out. I also held a shop-vac near the hole to catch the powder that was very small. His mask and goggles were off after the first hole was made.
As you can see, this is the best way to deal with a very messy situation. He bought his own Morris bowl and said that he could cut a lot of time off of the clean-up time for future can installations by using it.
