VERTICAL SLIDE WITH DOUBLE SWIVE.
Both the base and the table of this milling slide are able to rotate.
THE TABLE MEASURES 100MM X 125MM WITH THREE TEE SLOTS.
BOTH SQUARE THREAD AND BRASS NUT.
OTHER SIMILAR SIZED MACHINES CAN BE COMPLIMENTED WITH A VERTICAL SLIDE.
VERTICAL SLIDE WITH DOUBLE SWIVE. THE TABLE IS 100MM X 125MM WITH 3 TEE SLOTS, SQUARE THREAD, AND BRONZE NUT. THE VERTICAL SLIDE CAN BE FIT ONTO OTHER SIMILAR SIZED MACHINES WITH THE HELP OF 2 T NUTS ON THE BASE.
I can’t believe they are selling something that is so poorly machined. One of the tee slots is not perfectly straight because it was not machined straight. The slide gib screws have not been machined in a perfectly straight line. On one side of the slide, there is a gap of over 11 thousand gaps in the fit. There is a reaction to the table. Because the base of the tee bolts will only catch on one side of the tee slots, I’ll have to use loose-fitting tee bolts instead of tight-fitting ones. There isn’t a perfectly level machined surface on it. The table top, on the other hand, is not too bad when compared to the rest of the machined surfaces on the table. Short and sweet, I’d say that the castings were crude and the machining was poor. I would never purchase another product from India in the future. This is a bluefox myford mill slide item from the Bluefox Myford Mill Slide Collection.
