Vertical and Horizontal Models of the Rotary Table 3 Inch – 75mm Diameter.
Dimensions of the base: 4. 1/8 in “4 T-Slots: 5/16″ – Vertical Height – 1-5/8 Inch x 3. 1/4″ x 3. 1/4.
A five-degree increment is used to calibrate the table scale. It can be used in both horizontal and vertical orientations.
In layman’s terms, the gear ratio is 36:1, which means that one rotation of the handle will cause the table to rotate by 10 degrees.
Vertical and Horizontal Models of the Rotary Table 3 Inch – 75mm Diameter. Dimensions of the base: 4. 1/8″ x 3. 1/4″ Four T-Slots: 5/16” “Inches – 1-5/8 inch in vertical heigh. A five-degree increment is used to calibrate the table scale. It can be used in both horizontal and vertical orientations. In layman’s terms, the gear ratio is 36:1, which means that one rotation of the handle will cause the table to rotate by 10 degrees. T Slot Cleaner is completely free. The product is manufactured in India.
The accuracy of this rotary table, like that of other smaller models, is not as high as that of some larger models. Notably, some mills have different-sized holes for clamping to their surfaces, which I corrected with a custom-made tnut (larger nut, smaller threaded hole) and by bolting the rotary table to an angle plate with slots when bolting it at right angles to the ways.
