OMEX New Rotary Table Horizontal & Vertical 4″ / 100MM For Milling Machin.
Brand New Very High Qualit. How many times does it say 4? “A regular rotary table for smaller milling machines that has a diameter of /100 mm. Can be put in both horizontal and vertical positions.
There are 360 degrees of rise on the table. Worm Gear Ratio is -1:36, which means that when you turn the handle, the table will move 10 degrees to the left or right.
Cente. In a vertical position, the height is 2-1/16 ” (50 mm approx. With the hand wheel, you can move it in 10 minute increments. You can also set the hand wheel to zero.
Free – T Slot Cleaner with Table. This is what you get for free. Boxed up.
New Rotary Tables for Horizontal and Vertical 4 are coming out soon “100MM for the Milling Machine. Ne. A lot of very high qualit. How many times does it say 4? “A regular rotary table for smaller milling machines that has a diameter of /100 mm. Can be put in both horizontal and vertical positions. There are 360 degrees of rise on the table. Worm Gear Ratio is -1:36, which means that when you turn the handle, the table will move 10 degrees to the left or right. Vertically, it’s about 2-1/16 inches tall ” (50 mm approx. This is how it works: The hand wheel has a number on it that changes every 10 minutes. It can also be set to zero.
I didn’t think that the quality would be so good for the money I paid for it. Other reviews don’t give as much hope for the quality of this rotary table, saying that a lot of work would be needed to make it useful. But the one I got works very well, with very little backlash. I was surprised, because I thought I would have to work on the machine to make it work. I was able to use it right away for light-duty machining, and it worked very well. I would not be afraid to buy this one again.
