Most 7-1/4, 8, 8-1/4, 10, and 12-Inch Miter, sliding compound miter, chop, and portable saws will fit this tool.
Redesigned laser to keep it from hitting material when cutting very deep into the material
More saws will fit in a new design that is much thinner, so more people can use it.
New laser lines that are brighter and more accurate have been made.
It comes with an extra set of LR44 batteries.
Make your saw into a precision cutting machine with our new 2nd generation laser guide. It is the easiest and best way to do this.
In order to put the laser unit in, you just need to replace the outer blade flange with the laser unit.
You don’t have to worry about any parts or adjustments.
The laser guide makes the line on the left of the saw blade kerf brighter and more accurate. It also makes it safer because it shows you where the blade will cut.
The centrifugal switch turns on the laser by itself.
Will not work with some 12-inch saws that have flanges that lock together, like Rigid and ProTech.
Use our Radial Arm Saw, model LG-R01, with saws that have a 5/8-inch threaded arbor shaft so you can cut things like wood and metal.
600-680nm, 5mW, Class IIIa laser.
Doesn’t break any rules in 21 CFR CH 1.
Wavelength: 630-680nm, Max Output: 5mW, Class IIIa Laser Product. This is a laser product.
Doesn’t break any rules in 21 CFR CH 1.
If you want to turn your saw into a precision cutting machine, Oshlun’s new 2nd generation laser guide is the best way to do it.
In order to put the laser unit in, you just need to replace the outer blade flange with the laser unit.
You don’t have to worry about any parts or adjustments.
The laser guide makes the line on the left of the saw blade kerf brighter and more accurate. It also makes it safer because it shows you where the blade will cut.
The centrifugal switch turns on the laser by itself.
Will not work with some 12-inch saws that have flanges that lock together, like Rigid and ProTech.
Use our Radial Arm Saw, model LG-R01, with saws that have a 5/8-inch threaded arbor shaft so you can cut things like wood and metal.
OK, I use a chop saw all the time.
In the past, I had to replace all the deck boards on my back deck, which was a big job.
For better cutting, I bought a laser.
I put the unit in place and pressed the start button on the saw.
Nothing.
There’s no red line anywhere.
Thought the batteries might be the problem, so he changed them and it worked again.
Even though I finished the circuit inside before I put it back in, the laser worked when I put it back in. I thought I had solved the problem.
I reinstalled it, and what do you know?
Not at all.
Most of the things I’ve bought from Amazon have been great, but this was a let down.
Not sure why it won’t work, and I hope the manufacturer reads this and sends me a new one.
