Oiler that attaches directly to the air tool in a small package.
Only when the tool is in use can it accurately measure the proper amount of oil to be applied to it.
Use on all air impact guns, air wrenches, body shop air tools, and pneumatic hammers that require 1/4 inch air lines, such as pneumatic hammers and impact guns.
If you are using a pneumatic tool, never use motor oil.
Prevents the premature failure of expensive pneumatic tools, as well as the formation of rust and the increase of torque by up to 25%.
Description of the Produc.
A small oiler that attaches directly to the air tool’s air hose. Only when the tool is in use does it accurately measure the appropriate amount of oil to be applied to it. There are no adjustments required. 1/4 inch male NPT outlet and 1/4 inch female NPT inlet are both 1/4 inch NPT. Utilize on all air impact guns, air wrenches, body shop air tools, and pneumatic hammers that require 1/4-inch air lines to function properly. Please keep in mind that you should never use motor oil in a pneumatic tool. Contains a special additive that prevents “burn-out” of expensive pneumatic tools while also preventing rust and increasing torque by up to 25%.
The Manufacturer’s Statemen.
Inline tool oiler 41101 from Plews/Edelmann.
Because the item picture in the advertisement shows the screw for filling oil located inside of a metal end piece, this is exactly what I was looking for. The oil fill screw is dead center in the plastic middle piece of the item I received, despite the fact that it had the correct item number. This is exactly what I did not want because, according to reviews of other similar products, the screws in the plastic can strip out too easily. What exactly is this, a bait and switch with erroneous photographs?
