My intent was to us the saw to cut out blades and then put saw and table away when not in use. Good decision, I use that little saw for so many things. Cutting pins, trimming handle materials, cutting bolster material, opening steel packages from Aldo and the list goes on and on.
An angle grinder is a hand-held power tool used for cutting. Many different types of cutting wheel can be mounted on an angle grinder but they’re all essentially grinding wheels. Our vertical bandsaw is used more for cutting shapes than cutting to length.
I have almost everything, 4 by 6 bandsaw, portaband, portaband on a stand,angle grinder with a thin cutting wheel usually fitted, another angle grinder with a regular abrasive wheel usually fitted, a dremel usually fitted with a cutting disc, an abrasive disc chop saw use of a circular saw if Ineed to cut Aluminium sheet, and a bench mounted shear for thinner stuff. This 100yr old machine will virtually silently cut its way through anything within its capacity and turn itself off once the job is done. It is fairly, though not perfectly accurate ( Within 15 thous in 4 inches depth of cut.
I have until now just used an angle grinder to roughly cut out my knife blanks from ground flat bar and then grind to the line on the bench belt grinder and that is working out ok. I have been wanting to pull the trigger as it were on one of these portable metal cutting bandsaws for a few months but trying to justify the cost for doing the same job as my angle grinder. Metal cuttin bandsaws are more than worth their cost, you won’t be throwing away as much materials as with an angle grinder.
We originally didn’t want a lot of rules, because we thought this was a pretty straightforward sub. Some posts have shown there needs to be a few. Any machine posts should be focused on the actual tool that’s being used as a result of the machine.
If you buy a metal bladed chop box you can just buy wood blades and be able to cut wood, just not in the metal area so there is no flammable saw dust from wood….its more versatile than an abrasive cut off saw for hobby. Even if you go with the abrasive cut off saw its 100% better than the 4 inch angle grinder for both speed and accuracy. Never having tried another chop saw I am going to venture out on a limb and say it’s pretty awful as chop saws go, but I don’t regret this particular purchase, it fills a need for a reasonable price point.
PilotjohnS. 07-04-2020, 08:05 AM. Not sure about the 10, but for my 9 build I acquired a bandsaw early on but never used it. 07-04-2020, 09:24 AM.If you want a bandsaw or portaband, you should get one if your budget allows. 07-04-2020, 11:58 AM.If you want a bandsaw or portaband, you should get one if your budget allows.
I have already purchased pretty much everything I need to start fabricating but I am completely stuck at which saw to purchase. “So in all my research it seems like most people prefer a carbide steel blade for a saw, but the downsides seem to be that if you have to cut rebar or something fairly hard, you run the risk of breaking teeth off a $100+ blade, or at least dulling it very quickly. Then my most recent research brought me to benchtop band saws… yes they are a little pricey but I want to get something that can cut through almost any metal and not have to worry about it breaking a blade.
portable band saw vs angle grinder Related Question:
Is a portable band saw worth it?
The portable band saw is one of the few tools that, when used with the right blade, is equally effective regardless of material. It can cut straight lines or curves, so it can be used for joints, precision cuts, or decorative work.
Is cut off saw same as angle grinder?
A cut off tool can only be used for cutting, whereas an angle grinder provides you with cutting, shaping, sharpening, grinding, and other functions. A cut off tool can be easily operated with one hand, while the angle grinder requires both hands.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Can you put a circular saw blade on an angle grinder?
Angle grinders or disc grinders are a handheld power tool for grinding (abrasive cutting) and polishing stone, metal, and concrete. Although manufacturers warn against attaching a circular saw blade to an angle grinder for cutting wood (Fig.
Which portable band saw is best?
1. Best-Rated Portable Band Saw—DEWALT (DCS371B) 20V MAX Portable Band Saw. As Amazon’s choice for best portable bandsaw under $200, the DEWALT Max portable band saw is an ergonomic tool with a soft, comfortable, and flexible grip, and a centered handle position for optimal balance and accurate cuts.
What is the difference between angle grinder and grinder?
In a nutshell, a die grinder is typically smaller and has several different attachments that can help you cut, sand, polish, and various other things. The angle grinder is a larger and often heavier tool that uses a rotating wheel to grind, sand, or cut larger materials.
Can you use a cut-off wheel on an angle grinder?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
Do mechanics use angle grinders?
Angle grinders are standard equipment in metal fabrication shops and on construction sites. They are also common in machine shops, along with die grinders and bench grinders.
Can a band saw cut rebar?
The Milwaukee M12 Band Saw is the first official one handed cordless band saw so it is super easy to use holding the rebar in one hand and cutting with the other.
Is there anything an angle grinder can’t cut?
The inspiration behind this creation is the natural defense mechanisms used by shells, grapefruit skins, and fish scales that makes them resistant from the attacks of various sea creatures. The material, named Proteus, cannot be cut using either angle grinders, drills, or high-pressure water jets.
How deep can a 4.5 inch angle grinder cut?
A 4.5 angle grinder has a blade that is 4.5-inches in diameter. This means the blade extends 2.25-inches for the center in each direction. As a result, it is not physically able to cut through 4 inch concrete. Select a larger grinder when a deep cuts are necessary, such as a 9-inch grinder.
Do angle grinders cut wood?
An angle grinder is a power tool that can be used for different projects. You can cut metal, aluminium, concrete, bricks, pavers, wood, and other dense materials; you can sand and polish different surfaces to sharpen tools and grind materials.
Will a metal cutting disc cut wood?
Can I Use a Metal Cutting Disc on Wood? The short and stupid answer is, yes. But, it’s not ideal and most pros would very much advise against using a metal cutting disc to cut wood.
Can I use diamond blade to cut wood?
According to DIY blog Hunker.com, diamond blades aren’t the best choice for cutting wood. As stated earlier, these saws are manufactured to handle the toughest materials, and wood isn’t one of those. Wood, especially boards, have soft fibers which can easily be damaged when the cut is not done correctly.
Will Milwaukee band saw blades fit DeWalt?
Blade. If you’ve used any type of power tool, you’ll be well aware of the importance of the blade, and keeping it maintained properly. The Milwaukee 2429-21 XC compact bandsaw allows for blades up to 32” to be used, and the DeWalt DCS317B can take a blade with the sizing of 27 ½”.
