I bought a used PC 3×21 352VS sander and need to get a new bottom metal plate since the old one is worn. How do you tell what type the sander is, since I see there are 6 types of 352VS available. I am replacing an oiler and bearing on a Porter Cable 352VS belt sander.
porter cable belt sander 352 Related Question:
What size belt does a Porter-Cable belt sander take?
The Porter-Cable 362V has a sanding belt that’s 4 inches wide and 24 inches long. This is a decent belt size that allows you to work on both smaller and larger surfaces. The included black sanding belt is made from zirconium and can be used for metal or steel surfaces.
Does Porter-Cable make belt sander?
Variable-Speed Belt Sander | PORTER-CABLE.
Where is Porter-Cable belt sander made?
Porter-Cable is headquartered in Jackson, Tennessee. Manufacturing in the United States has mostly ceased; tools are now made primarily in Mexico and China.
Do you need a variable speed belt sander?
VARIABLE SPEED. A belt sander excels at removing a lot of material at high speed. But you should also be able to use your sander to do controlled sanding. That’s when a variable speed motor can be helpful.
Do I need a belt sander?
Belt sanders are highly effective tools for removing roughness and preparing woodwork for less aggressive tools in the process like random orbit and finishing sanders. It is crucial to belt-sand with the wood grain rather than across it. Otherwise, the belt sander’s lateral action can ruin the work.
Is Porter-Cable owned by Black and Decker?
One, a whole bunch of the top power tool brands — including DeWalt, Black & Decker, Craftsman, Porter-Cable and more — are all owned by the same company, Stanley Black & Decker.
Is Porter-Cable a good brand of tools?
For the price, the Porter-Cable is a solid tool. It’s a great value, especially if you won’t be using it very much. However, if you’re planning on using a drill driver nearly every day, you should likely buy the DeWalt. The Porter-Cable simply isn’t made for that kind of use.
Is Porter-Cable the same as Black and Decker?
Up until a few years ago, the Pentair Tools Group was the owner of Porter-Cable. However, in 2004, Stanley Black & Decker purchased the Porter-Cable brand, and to this day it still owns it. Yes, that is right, both brands being compared today are owned by the same parent company.
What is the best speed for a belt sander?
The optimal speed for belt grinders is largely dependent on a number of factors, including type of abrasive grain, grit grade, workpiece material, and more. Generally speaking, a safe speed in most cases is 3,000 surface feet per minute. You can calculate surface feet per minute using the formula SFPM = RPM X .
What’s better orbital or belt sander?
A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
What grit sizes are commonly used on a belt sander and why?
Choosing the Right Sanding Belt Grit The heavier the job, the coarser the sanding belt you’ll need. 40 to 60 grit is best suited for the heaviest work. When you’re performing tasks such as smoothing surfaces or removing minor blemishes, you’re better off using sandpaper with 80 to 120 grit.
How much wood can a belt sander remove?
As mentioned earlier, abrasive belts can only remove a certain amount of stock dependent on grit size. With a three-head sander you can run a grit sequence of 100-150-180 and remove approximately 1/32 inch in one pass.
What is a 1/4 sheet sander?
1/4 sheet sanders remove material using small orbital motions. Named after the size of the sanding plate, they take one quarter of a traditional sheet of sandpaper. This makes them ideal for smaller projects and small-to-medium size areas.